Recent content by luddite

Archived from groups: (More info?) Jeff Liebermann <jeffl@comix.santa-cruz.ca.us> wrote: > On Wed, 28 Sep 2005 09:43:51 -0300, Derek Broughton > <news@pointerstop.ca> wrote: >>> Now I'm puzzled. I thought SSID b/cast was basically for the benefit of >>> site-survey needs: >>> in other words...

Archived from groups: (More info?) William P. N. Smith <> wrote: > bandit2941@aol.com wrote: >>a Linksys WRT54G. According to the linksys software on the recieving >>end, I have a 51% signal, 3 out of 5 bars, and -77 dB with -79 dB of >>noise. > Only 2dB signal to noise? That can't be...

Archived from groups: alt.comp.periphs.mainboard.asus (More info?) I tried to install XP home on an older p2v and it stopped after finding some bad ram,is there a utility that will point out which one it is?

Archived from groups: alt.internet.wireless (More info?) Bill Crocker <wcrocker007@comcast.net> wrote: > I just read about ParkerVision last night at Tom's Hardware. Today, I > picked up their WLAN1500 wireless PC LAN card at my local CompUSA. It is an > excellent card, and their software...

Archived from groups: alt.internet.wireless (More info?) dold@xrexxwirel.usenet.us.com wrote: > Jeff Liebermann <jeffl@comix.santa-cruz.ca.us> wrote: >> However, in the case of a PCMCIA (or cardbus) radio vs a USB radio, >> there's also a question of power. Some USB radios are seriously under...

Archived from groups: alt.comp.periphs.mainboard.asus (More info?) Paul <nospam@needed.com> wrote: > In article <cbanrv$ntk$1@e250.ripco.com>, Luddite <a2k@ripco.com> wrote: >> I have a known good p3 600 at 1.65v that wont work in my p2v >> it has 1004 beta 05,should it support this voltage...

Archived from groups: alt.comp.periphs.mainboard.asus (More info?) I have a known good p3 600 at 1.65v that wont work in my p2v it has 1004 beta 05,should it support this voltage? I left the bus at the old settings of 83x3.5 any tips on this one or is time to upgrade?

Archived from groups: alt.internet.wireless,comp.sys.mac.hardware.misc (More info?) In alt.internet.wireless DaveC <me@privacy.net> wrote: > AirPort Extreme (model without external antenna connector) needs to connect > to a Dr. Bott's ExtendAir high-gain antennas. > What are the connectors...

Archived from groups: alt.internet.wireless (More info?) Chuck Daniels <nyresource@hotmail.com> wrote: > Unfortunately the Netgear utility does not let you specify the channel > when you are in infrastructure mode. The only options are SSID, > country, and mode (b or g). Is there any way to...

Archived from groups: alt.internet.wireless (More info?) looking at the fcc submissions for the 900ap+ I saw one version of the board shown had traces and holes to accept 2 sma sized connectors. anyone know which hardware version has them? http://pages.ripco.net/~a2k/900ap+.jpg