Recent content by Malfunctioning Eddie

I gave up on this. I installed an old nvidia Quadro M2000 5 weeks ago and bypassed that igpu. ZERO problems after that. The CPU is working just fine otherwise. Lesson learned. Never get these APUs again. Two times I've tried, two times I've had issues. From now on it will always be a separate...

The problem is, with this setup I never had a driver that didn't do this. I have tried versions 21.10.2 21.8.2 21.9.1 21.6.1 21.11.3 So I didn't try different versions while mine was working properly, it never was, with any version. Usually I don't update drivers if I don't have a specific...

I have tested it with memtest and it passed. Also I used the same set with another computer and it worked just fine. The problem started immediately when I assembled this one, using the same RAM. It seems now that most of the time when I get those artifacts I also get the notification about...

Final update: Restored an image that had none of those aforementioned drivers. Installed AMD graphics driver. Didn't take more than 5 hours to get the error again. I've had it. Can't be bothered with this anymore. I removed the driver and installed an old nVidia graphics card I had in my...

RAM installed to slots A2 and B2, this was recommended in the manual. When I install this RAM it is 2133 by default. I have tested it with 2133, 2933 and 3000. No difference. With 2933 and 3000 I used the ready made profiles, didn't change any settings myself. What also comes to mind is that I...

I sent this to AMD support and got multiple replies. Sent them all kinds of logs etc. The result : Nothing, it was absolutely useless. They just told me to reinstall Windows etc., which I have done already. Next I will just bypass this iGPU with a discreet card and never buy these kind of...

I acquired the drivers from EPSON USA official website. https://epson.com/Support/Printers/All-In-Ones/ET-Series/Epson-ET-2720/s/SPT_C11CH42201 Win11 drivers did that thing for me. I even tried the older driver version that is meant for Win10, nothing worked. I needed to do some work so I was...

I will reply my own question, I was too hasty and posted it, then I figure out my problem. It seems to be a problem with Win11 print spooler. When I open the console and stop the spooler - clear it - start again, that printer works again, for a while. Until I need to do it again. This never...

I have Epson Ecotank ET-2720, and a very strange problem. I used it with Windows 10 and everything worked fine. Then I installed Windows 11, and used it with that as well, for a week or so, and everything was still fine. Next I installed Epson Perfection V550 scanner. Later I had this idea...

I wasn't sure if I should post this under CPU, graphics cards, motherboard or what because I am not exactly sure what is causing this issue. My problem is this: I built this setup 5 weeks ago. Ryzen 5 5600G + Arctic Freezer 34 ASUS Prime B550-Plus Corsair CMK16GX4M2B3000C15 - 2 x 8 gb DDR4...