Recent content by manlol

I switched it to 24 hours and tested it for a few hours and it seems that may have done it, havent had any disconnects since then and I also havent been seeing the errors anymore. I'm gonna give it the day to see if its fully stable and working and if it is I'll mark the thread as solved, if...

Just changed lease renewal time to 168 hours and restarted router. Was browsing for about 20 minutes to test disconnects and I am still recieving them. and I am also still getting the errors in my error logs. Anything else we could try?

On my old router, the Netgear one, the error logs would be something like "T3 or T4 timeout no ranging response recieved" or "Received response to broadcast maintenance, but no opportunities recieved" whenever the connection went out. They weren't exactly that as I do not have that router...

Windows IP Configuration Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Ethernet: Connection-specific DNS Suffix . : Description . . . . . . . ...

Yes, that router is correct and you do have the correct diagram on how everything is configured. I have tried disabling IPv6 a while back and I believe I did so properly but the router still is showing DHCPv6 lease time. I'm not really too sure how any of this works but I'd imagine if IPv6 was...

Hello, For the better part of 6 months I have been dealing with constant disconnects for about 30 seconds to a minute every 5 minutes on my entire network followed by error logs constantly displaying messages such as "ti_dhcp6c: 72001009-DHCPv6 - No Advertise or Reply Received 3060 times" I...

I did some testing with PBO2 and undervolting and I've completely fixed my issues, temps have dropped over 20 c in some instances and max load temp is 74 c without any noticeable performance drops. Thanks for the help!

Hello, I just recently upgraded to a Ryzen 7 5800x from a Ryzen 1600 and I've been noticing really high temps, I'll be at 40 c while idle and then while gaming my temps shoot up to 70 - 75 c, the main issue is when I go to stress test it via Cinebench and MSI Afterburner my temps immediately...

The games the pops happen in is the COD titles I mentioned in the original post and GTA V. The other games I play which are Fallout 4 and Destiny 2 don't experience pop in issues and mostly experience very poor LOD issues Texture pop in - View: https://imgur.com/a/mRllHAt Poor LOD - View...

The PSU is relatively new, about 3 - 4 months old now, do you think its a bad quality PSU? I have monitored the drive while playing and don't really notice anything odd, the temps are a little high - 45 c - but I've never seen them go any higher than 50 and people are saying that NVMe drives do...

Hello, I recently bought a M.2 NVMe drive for faster storage and just for more storage in general. It runs pretty good and fast but my only issue with it is games that are installed on it experience really bad texture pop in and very low LOD issues. Weirdly enough I've installed the games with...

I haven't updated the BIOS to 3.90 myself, that is the version it shipped with so I think it would be a pretty risky gamble that I'm not willing to take so I'll just go with the Ryzen 7 3700x then, thanks for the quick answer.

Hello, I've been looking to buy a new cpu lately and I've settled on the Ryzen 5 5600x, the issue is that the board I'm using currently using doesn't support a 5000 series cpu, there is a newer BIOS version that does allow it to support them but to update to that BIOS version, it tells me...

Sorry for late response but ive found the problem, it turns out, Ryzen Master was automatically overclocking my cpu to 3.9 ghz without me even knowing (Stock is 3.6) so i reset clock speed to factory default and ive been able to run every game i play for hours now with no problem. I guess its...

Will do tomorrow and update if it fixes it or not, my old PC was a completely different system and its parts were quite older but i was under the impression that sysprep would remove every type of driver related to all of that and i would be able to put my hard drive in a new system with no...