Recent content by maraxion

Correct. The controll port goes from motherboard and identify the fan in port 1. The other fans on the hub wil then receive the same signal as the one in port 1, even if other size and speed rating. So what I want to know if that matters at all, or if a pwm signal only is %, and thus all fans...

So all fans wil reach their own individual % and in that it does not matter which fan is connected to the controlling port as long as all are pwm fans?

Hi. So iv got a few pwm fans laying around. They are of different size and rated at different DC voltage. Iv now ordered a hub, in my case the"Artic case fans hub". This has outputs for 10 fans that relay on the input on fan in port 1. So if I now connect these different fans, should I connect...

Don't have that option I'm afraid. But the lines issues I'm having is only when using DP port. I'm guessing this is a likely culprit then? And if so then the card should be safe to use on other ports. But there is no good way of fixing unless I get a guy to solder on a new dp connector? Hoped...

So iv gotten a second hand 2060 super that displays red horizontal lines only on DisplayPort. So I took a peak inside the DisplayPort: DisplayPort That can't be right? It seems one of the connectors (left one) is bent upwards? Any tips to get that down? I'm sure I can run the card with the...

Yea I can do some testing, but I have no post so booting from usb is impossible. But the mainboard light up on "VGA", which would indicate non working or non present gpu... Iv tried 2 gpus no start. Im worry I somehow have damaged my MB while changing out gpus, or pressed to hard when I now...

Hi. So i was making my comuter ready for sale. I put an graphic card in, and changed the psu. Both parts worked 2 days ago. I started the computer, and went right into windows. I forgot to wait for the drivers etc to load, and just went to the start meny and pressed restart windows because I...

Hi. So iv got an phanteks enthoo pro case with an asus card with a 4 pin header. I then ordered a cheap fan hub the "arctic case fan hub". Said to operate 10 fans with 3 or 4 pins, speed adjusted by the fan in slot 1 on unit. But offcource 3 pins cant do pwm, what then? Hub connector info: Now...

I would but I already own these kits. I know it should be quite possible to oc to around 3200 so hoped for tips from those with more knowledge 😃

So iv got 2 sets of Corsair ddr4 memory, both 2x8: 1. Corsair vengeance lpx 2666 cl16. V 3.21 2. Corsair vengeance RGB pro 2666 cl16. V4.32 I am only keeping one set. As of far iv found the lpx might be micron b die, 4gbit. And the RGB pro Samsung c die. I don't quite understand much more then...

Hey Darkbreeze, since you have worked on this enthoo before I wanna ask you about the mb risers. The center riser is different, almost as with an insert in the nut. The threads for screw is the same doh. Is this normal or should I exchange it? Edit: Nevermind. Its the aligning riser... It's...

So I need to build and got 2 decent cases. The full tower phanteks enthoo pro and the maxi tower cooler master storm stryker. The storm stryker is huge! What I really love with it doh is the buttons on the front for manual fan speed 6 step. If I use the phanteks, is there any way to adjust the...

Yes I see that. Unfortunately the x470 isent that great of a board itself. It's a mid range ok board with decent heatsinks to make the 4 phase vrm survive ok. But yeah most wil see "gaming" and go nuts. It seems its either stick with the intel board, or sell both rigs and buy something better...

That's an excellent point TerryLaze. I'm just trying to make sure I get the best deal possible. Iv been using my now retired rig a 1. Gen i7 for quite a few years, and I like my systems to last while upgrading used cpuz on the way. But I see your point, I might not need those extreme cpuz, and...

Yep, prices here are inverted doh. I bought a 980 pro with heatsink. I think it wil cover my needs, and hopefully last.