Recent content by marleo

I checked again using prime95 26.6 After reapplying thermal paste i am reaching idle temps of 35-38 degrees and with small fft im getting between 65 and 68 degrees. ( Spiked once for about two seconds to 75 but went down again and never back up - happened immediately after starting prime95)...

When starting Prime95 in Small FFT's the temperature immediately goes to 86 degrees... doesn't go above that, but thats too high right? Should i now just try to reduce the voltage and check if its stable ? If so, how much of a temperature difference would it take if i could take it down to 1.8v...

Thanks for the fast replies! Tested it for about an hour. Idle its at a stable 35 degrees. Thanks for the recommendation! I'll download it and give it a shot. What would be the recommended settings for Prime95 in combination with my cpu?

Hey guys, Im trying my first OC right now on my old i5 4670k because its getting slow for todays standard. i set the core voltage to 1.19 (manual) and the core ratio to 42. (sync all cores) Those were my results after running IBT a few times. Cpu Settings and Temps - Imgur Is it fine or do...