Recent content by Mattotk

Hello, already fixed the issue, it was the PSU, but for a different reason than the one I thought, it was overheating and shutting down to protect itself. The cooler was failing, spinning fine but after swaping it with a pc case fan, it worked fine with no more shutdowns, nor errors.

Thanks for the reply. PC RX 6500 XT - max consumption around 80w. I3 9100 Asrock H310CM-HDV 16gb ram ddr4 2666mhz 2x8gb. Psu Newcase p4-600w I will test a different motherboard, as soon as possible, I'm really curious about the cause of the problem, why it fails randomly in some cases, while...

Solved: The problem was in the PSU, the fan was failing and overheating it, after a fan swap, it worked fine without problems. Hello there, first of all, thanks for reading, and possibly providing any info about the possible cause of the problem. 2 days ago I opened a football game, Efootball...

Hello there, hope you are having a good day. I'm having a weird problem since 3 days ago, I turned on the monitor and it started to blink showing the manufacturer's brand and then rebooting itself in a infinite loop. It doesn't matter if the monitor is connected to the pc or not, as soon as it...

Hello, have you tried a different monitor/tv? If you have an integrated gpu, you could try connecting the monitor to that video output just to see if the problem persist. It can always be a bad wire but also the monitor or the gpu.

Hello, i have strange news because the port is working again, even when i didn't do anything. I didn't get to clear cmos as i was going to try something else first, i was going to shut down the pc, remove the cord from the psu and then hold the power button for several seconds but i didn't. I...

So far we know is not Windows related as it also happens in Linux, so i'll try with the clear cmos and with too much luck it will work, and if it does work then i will be extremely confused.

Haven't tried to clear cmos, i didn't modify the bios at all, do you think a clearing would possibly recover a dead port? i mean dead because it seems to have no energy.

Sorry i mixed the two models, it's the H61M-VG3, yeah that's the first thing i did, it says that there is no cable connected, tho the cable does work in a different device.

Asrock H61-vgs Windows 10, the problem persist out of windows 10, ethernet is enabled in bios and there is nothing different except for the port not working at all, even device manager shows no issues.

Hm totally strange but glad you solved your problem

I was going to ask about what happens when you only use one stick, so there is no image when you use the "faulty" stick alone, but both sticks work well with the gtx 1060...

And if you go back to your old card the problem persist?

Hello, so this happened right after updating the gpu?, or you actually had days of use before the problem ocurred ?

I casually had the stick with lubuntu and the ethernet worked fine a month ago, i'm just pissed about how it happened, it's the curiosity that kills me, the audio being gone during the first start also confused me.