Recent content by Mcgovern

what would a good tool to log the usage be?

CPU: i7 7700k cooler: Corsair Hydro Series H100i V2 GPU: Gigabyte 1070 G1 Mobo: ASUS ROG Maximus IX Hero Z270 PSU: EVGA Supernova P2 850w RAM: G.SKILL Ripjaws V Series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3000 (PC4 24000) SSD: Mushkin Enhanced Reactor 2.5" 1TB SATA III GPU under full...

Hi, I notiuced some games seem to micro stutter once and awhile so I've been monitoring my card. What I see that is strange is once and awhile it looks like the power consumption dips down and so does the GPU useage. Is that normal and if not what would be causing that?

Just as a follow up strangely deleting the Asus registration tool off my PC cleared up the startup BSOD. Seems all that from this stupid tool.

Fixed this awhile ago BTW figured it may help someone else to mention what seemed to do it. Turns out the ASUS registration tool was doing this for some reason.

any thoughts?

OK Specs are: i7 7700k Asus MAximus IX Hero z270 G.SKILL Ripjaws V Series 32GB (4 x 8GB) DDR4 3000 Mushkin Enhanced Reactor 2.5" 1TB SSD 3 TB Seagate HDD Gigabyte GTX 1070 G1 EVGA p2 850W I also had to turn off fast start up a little while back because every once and awhile it would not shut...

Hmmm Z270 here though.

MERGED QUESTION Question from Mcgovern : "HELP! Kernel-Power Event ID:41 Rask Category (63) on startup."

I'm having this same issue when I boot usually, sometimes when I restart then it'll restart and work fine...WTF

Here's what even viewer is showing: Critical 8/27/2017 4:25:47 PM Kernel-Power 41 (63) System - Provider [ Name] Microsoft-Windows-Kernel-Power [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} EventID 41 Version 5 Level 1 Task 63 Opcode 0...

I forgot to mention in the event viewer it's giving details of an improper shut down but looks to be turning off and restarting normally. I can post those later don't have them on hand.

So I finished a build in June and it seemed to be working good except until recently when I start the PC it randomly(becoming more consistent) gives a blue screen with page fault in non paged area after windows loads. It'll then restart and work fine, it was also having an issue getting stuck...