Recent content by Mirnij

Hello, so be careful about this card. It is the worst rx 5700xt with bad heat dissipation. Please spread the review on this card.

Hello. In the end, replacing the motherboard helped. Everything works as it should. Thank you for your time. Have a nice day

Hello. So only the replacement of the motherboard helped. Now everything works as it should. Thank you

Hello. I removed the hdd, removed the cmos battery, removed the gpu, removed the nmve from the adapter and put it in the nmve 2_2 slot. My pc still restarts when I turn it on for the first time. If I removed nmve 2_2, the pc would work correctly without restarting at startup.

I thought that when I buy an adapter for the pclie slot, my computer will not restart like in the m.2_2 slot on the motherboard. But that didn't solve the problem and it looks like I won't even solve it.

Sorry, I wrote it wrong. I use AXAGON PCEM2-1U as adapter in PCIEx16 _2 slot on motherboard for nmve m.2_2 disk

But then the pciex16_2 slot in which the adapter for the nmve 2_2 disk is also defective? Maybe you are right and there is a winter joint on the motherboard.

Ok. I was using 1 nmve disk slot. I had little space on the disk, so I bought a second nmve disk. I put it in the second nmve disk slot on the motherboard and when I connected it to the network, the PC turned off and turned on again, then it worked normally. So I removed nmve from the second...

Hello. So what are my options? Can I function like this or will my system crash over time?

Hello. I absolutely do not know which one it could be. Any suggestions?

View: https://imgur.com/a/Ws2sW6z

View: https://imgur.com/a/5veKdl4

View: https://imgur.com/a/dm8Ajrb

Hello. I tried with both DOPC and Default settings in the bios system turned on, but without success. I turned off fast startup in the BOOT menu. Can you please tell me where I can find the MEMORY setting and how to set it correctly?

Hello, the bios is the latest 3802. I also tried the Adata disk into the pcie x16 adapter, but the same thing happened. First power on reboot and then works normally. I don't have a problem with loading the disk, I can see it in the bios as well. It even loads my disk in the m.2_2 bay, even...