Recent content by Mohjolan

hello all hi you can wait 1usmus project to make your CPU overclocked and stable with lower temp and lower voltage according to linus tech tips View: https://www.youtube.com/watch?v=W872lQcy65I

i wish you had fix the issue with temp if not i have same 3700x and i was had same problem i fix thats spike in temp by edit my voltage and cpu ratio in bios setting and know its fine for me

thx all for helping me i solve (i think so) temp problem i do that l set the cpu Vcore to 1.250 v and make all core run at 4 ghz and my pc is stable now with all test i do cpuz strees for (15) min at high temp is 63 c prime95 (15) min high temp 59 c CinebenchR20 run all core at 5324 point...

my case fan from fantech 5 of them cooler from cooler master

its between 1.2 to 1.435

i try hwinfo64 and coretemp and Ryzen master in the hwinfo and coretemp there is spike of temps its go from 55 to 70 in just 1 sec on the Ryzen master there is no spike but same temp on stress i put every think in the write place as the guide of the manuel on the mobo and srry for my bad english

i saw the video thx alot i will try that now and correct the position of the radiator

i didnt change anythink and the voltage from 1.2 to 1.4 i think

i put the radiator on the right on side the case

hi all so i buy new cpu with new mobo i was on intel i7 8700k and i change it with Ryzen 7 3700x with aorus x570 with COOLERMASTERLIQUID ML240L RGB and my temps on idle is 50 to 60 on amd ryzen master program didnt miss up with any setting and i reaply thermal paste twice same result so my...

thx for replay and now i fix it with IPA alcohol and paint bursh

yes i do exactly what you say and now its all work fine now thx for help meant alot for me but there is one problem my water cooling when i put the water cooling down its not working and when i put it up the case it work fine for 10 min then read errorr

Hello, So i applied new thermal paste on my CPU. and i put so much of thermal paste and when i try to clean the TP(thermal paste) i saw the socket have a little ammount of TP so i try to clean it I did <Mod Edit> up a bit and bent 2-3 of the connectors from the CPU socket as i was cleaning my...

yes it was the cause because when i move the cooler form side to upside it work fine and i will buy dark pro 4 air cooler and all closed loop water cooler are trash

i checked with magnifyer and its all ok i use 24x what do you think except the bent pin will cause same issuse and i think you alot for replays