Recent content by Muhammad Jahid

My motherboard temp is always at 56-60 Celsius at idle. but cpu temp is fine (never above 25-30 Celsius at idle) I have tried to check the temp through HWinfo and speccy. Both are giving the same temp result. Cpu: Core-i3 10105 Mobo: Bioster H510MX/E 2.0

You are right about downloading the iso only from microsoft website but I used this particular mirror website (tg-adguard) to download the iso directly and its easy. From next time, I will try to use microsoft website instead of using others.

Thanks for your reply, I also gussed that to be the issue.

Recently, I did a fresh windows 10 installation to my pc. After Installation, I couldnt connect to the internet because the network adapter was missing. It says you have to install the lan driver. I hadn't have the lan driver in my storage drive and also couldn't update it through device...

I recently bought a low budget deepcool ag200 cpu cooler. Mobo: Biostar H510MX/E 2.0 CPU: Core i3-10105 I had to apply a lot of pressure while mounting it to the bracket, and It was too tight. After mounting it too tightly, my motherboards temps get higher than before. Now the temp is always...

There is no noticeable change in temps. and the fans have no separate cable for the led. The leds can't be controlled or off by the setting.

I had two casing fans, One at front as intake and the other at back as exhaust. But recently I removed the front intake fan and moved it to the top but kept it as intake as before. The change is made because I was bothered with the led light of the fan as I couldn't focus on my work at night. I...

You are right. I also guessed that there might be some problem in that cooler. Some Salesmans in our local market add different stock cooler with the tray processor and sell as a box processor. I think I bought one of them. I am going to buy a after market cooler. Thanks for your time.

I am using the cooler that came with the processor. The cpu cooler is connected with cpu fan header. I am using bioster H510MX/E 2.0 motherboard. I recently cleaned my pc. But I am not sure from when the problem started. I already gone through the bios. and I switched it to different modes...

I am using Cori3 10105 with its Stock Cooler. I recently found that the cpu fan keeps running at around 2700 rpm. It never changes whether the cpu is idle or in load. It always stucks in same rpm and causing noise. Is this Normal for stock cooler?

I heard almost all psu (without 80+ certification) are able to give at least 80 percent efficiency... I want to buy a thermaltake litepower 350watt psu...Can this model give 80+ efficiency though it is not certified?

In my region, Pny costs cheap than corsair ram. Can I choose this particular pny ram over corsair? Is there any difference in performance?

I am planning of building a low budget pc with Cori3 10105. I have two options for motherboard: i) Biostar h510mx/e 2.0 ii) Msi h510 A-pro Because of the cheap price, can I choose this particular biostar motherboard over msi? Is there any performance difference between these low budget...

I am using a mechanical hard disk(HDD). We know if the drive C: gets full, then it will gradually slow the whole computer but my question is- If any drive ( other than Drive C ) gets full, will it also slow the whole pc ? How much space should be empty for each drives?

I am little bit confused regarding the 'Ryzen 7 Pro 4750G' processor. Question: Is it a Zen 2 processor? If it is a Zen 2 processor, Can it be called a 3rd generation processor? Will it support in 'Ryzen 3000 Ready' motherboard?