Recent content by nate12

but that was intel specs not motherboard though, its Mortar B660 MSI 1x HDMI 2.1 with HDR port, supports a maximum resolution of 4K 60Hz 1 / 2 1x DisplayPort 1.4 port with HBR3, supports a maximum resolution of 4K 60Hz 1 / 2 Available only on processors featuring integrated graphics...

https://ark.intel.com/content/www/us/en/ark/products/134591/intel-core-i712700-processor-25m-cache-up-to-4-90-ghz.html Processor Graphics ‡Intel® UHD Graphics 770 Graphics Base Frequency300 MHz Graphics Max Dynamic Frequency1.50 GHz Graphics OutputeDP 1.4b, DP 1.4a, HDMI 2.1 Execution Units32...

Hey, I am getting 32 inch 4k UHD monitor tomorrow. I dont have GPU and not planning to get one. I dont play games and if i do it its on ps5 and its very rare anyway. Most likely i will get 60 hz to pair it with another 60 hz, but my question is IF i decide to get 144 hz one, will i have that...

anyone on this above? It will be 32' 4k as mentioned, its either 144hz for 60% more or 60hz. 3 24' monitors with 60hz will surround this new 32 with anyway so there is a question Should i chase 32 4k with 144hz or save and stay with 60hz if all the others will be 60hz anyway?

Just managed to found few topics about it and think its normal and called Intel speed sth tech. Also similar question about Ryzen : Normal for Ryzens, which slow down individual cores when idling. If your frequencies aren't jumping all over the place while gaming or stress testing the CPU, I...

Please leave it ser. I welcome every help but you are not answering and not sure whats the point Back to my problem. Lets leave fans speeds for now as i cant find help for this anyway, can anyone tell me if that CPU frequency jumps are normal? As mentioned earlier, its brand new PC. All i have...

I know that. My question is if that values i added in Bios for Fans are ok(i adjusted it a little bit randomly, just to put lower speed, but maybe thats too much) And is that CPU Frequency change is normal with such jumps every second during no load at PC. Lets say 10 tabs in browser open and...

Hi, I recieved my pc this week. I7-12700, msi mortar b660, noctua 15 cooler. At the start it was very noisy. I removed one fan from Noctua(not the middle one) as i was told it will be more than enough anyway but noticed it was the front fan that was making noise as it was working at 1000+ RPM...

So i changed topic, decided to go with 32' 4k. I will have laptop plus 2x24 one above the other on the left side(both regular work monitors Elitedisplay e242) In the middle i will have this new 32' for most of the stuff i do daily and on the right side i will use that same 24' i have on the...

anyone please? Can you guys check this values and let me know if its fine? PC is super quiet now

Pump fan is the front case fan. Noctua is connected to Cpu_Fan1, so the back Fan and the top fan are connected to Sys_fan1 and Sys_fan2. And yes i am able to manipulate blue curves, thats how i changed all those values. Of course its working, i fixed it, there is no noise anymore but the values...

I have no idea how to connect/disconnect it to different spots. Cpu fan, the middle one in Noctua is running, not sure why it shows 0 rpm here. I removed 2nd fan, Noctua D15 had 2. Pump Fan is the one in front on the case. I changed values again just to make it work, because it didint earlier...

Yes. Look at the last message i posted, maybe you havent seen it as i added like 3 posts one after another. One Fan, the front one called Pump Fan in Bios was running at over 1000 RPM. I switched it from PWM to DC, changed some values and it instantly went quiet, but right now its not working...

Made this changes. Moved Pump1 to DC and changed some values. Now its quiet, but the front case fan is not running

This is how it looks in BIOS. I have 3 case fans. One at the front, one at the back, one at the top and one fan from Noctua D15(removed one). Which one is the Pump 1 with 1000+ RPM? Maybe i can lower it? Maybe its not connected properly. Thinking out loud, just trying to make it better and less...