Recent content by Nick_60

SD Card Works in Phone but will not show in Windows. Card Reader is fine PC works with other cards Can't be seen in device manager/checkdisk/diskpart/device manager/easeus and doesn't make noise when inserted into PC. Can be used if in the phone via usb connection but cannot interact with the...

Solution found! Control Panel>Power Options>Change What The Power Buttons Do>Shut-Down Settings>Change Settings That Are Currently Unavailable>Uncheck 'Turn on fast-startup' Rebooted and have been able to startup fine since. Hope that helps someone, have been tearing hair out over that...

Hi Viv Which was the solution? The one with the green box that was a link to a guy talking about voltages? Changing Ram? Partition Master? I'm guessing the last one and changing second hdd to logical from primary. If that was the case could I not test this by removing the second hdd and...

Just gave it a go. The interrupt startup dialogue showed but same end result, it shutdown.

Hi Viv, It's a laptop. T420 Thinkpad if that helps. I'll give that a go right away and see what happens. Thanks!

I've seen lots about boot loops but this isn't that. Every other time the PC works fine. When the PC is turned on via the power button, the splash screen shows without the 'press f2 for bios' dialogue then continues onto the windows logo. Then the pc suddenly powers off. There's no error code...