Recent content by Nighthawk36

Also used asus's flash utility to change the bios version (you can do this without making it to post on that board), that also did not work

Nah resetting the CMOS only worked once then never again lol. I've tried it with no ram too because that should at the very least generate a different Q-Code. But the Q-code never changes from 00. I've tried all the RAM slots one stick, two, three, and four. Same result every time, Q-Code 00

Yeah everywhere I looked pointed to either a board or cpu issue. I'm going to guess it's the board as that one time I got into the BIOS all my components showed up fine.

Yeah so my motherboard (Asus Maximus X Code) is giving a Q-Code of 00. The led's on the board are all on, the fans spin. Just can't get it to POST. This is a brand new build. I've tried resetting the CMOS, which worked once and I was able to get into the BIOS, and all my RAM and processor...

yeah they are all high. It's a 6 year old corsair ax860i. the Power_OK pin specifically reads a 6 lol. I'm gonna go get a new PSU

I'm testing voltages on my 24 pin connector with a multimeter trying to figure out what's preventing my system from booting. It's reading as follows 12v = 14.24v 5v= 5.91v 3v= 3.89v Are these normal, or do i need a new power supply? My 12v reading seems rather high.

There's no GPU plugged in. I have tried the cpu with 1 ram module and nothing else plugged in. Still get the same 00 code

Brand new build, using Asus Maximus X Code for the motherboard. The Q-Code display on the board shows 00 and wont POST but fans and LED's on board come on. I've looked around online and everything seems to say this code points to either bad motherboard or cpu. I have an i7 8770k, no RAM in...

nope, it's an 860 watt psu, and with everything plugged in i'd only need about 500.

My system is about 5 years old. Got a new gpu the other day, plugged it in. System was running like a champ. Shut down the computer at the end of the day. Woke up today went to turn on the PC, nothing. No lights on the motherboard or GPU. Unplugged everything from the motherboard except...