Recent content by O-steal

I found the answer, in the details of the thunderbolt specs, you can see it is thunderbolt 1 with max 10Gbs so only DP 1.1 https://www.asus.com/us/ROG-Republic-Of-Gamers/ROG-G750JH/

That's the issue, DP 1.2 should support 144Hz 1440p but here it doesn't and 120Hz is only working by scaling down quality and going YCbr422 Maybe the mini display port adapter form Oculus is not 1.2? This would be strange

Likely, but I was seeking hard evidence on that.

I tried using the mini display port to display port adapter from my rift S and I am able to reach 1440p 120Hz only, but the color changed form RGB 'full' dynamic range to YCbr422 'limited' dynamic range and texts (for example: the colored texts in 'display settings' are blurry and usually blue...

Thanks for the clarificaiotn, couldn't find the specs online. And according to you, I fI were to blug a mini display port in my thunderbolt, would the card be able to leverage it?

Hello I have a ROG g750jh laptop equiped with a 780m. The available outputs are hdmi, vga and there is a thunderbolt on the system. I read that technically, I should be able to get 144Hz 1440p using HDMI (2.0 supported) but I tried several cables and I cannot get more than 60Hz. What is the...

Conclusion: RMA'd the CPU , received a new one. The new one turbo to 4.3 with all by default. With default PBO of the mortar I reach 4.35 spikes on 2 cores. It was the CPU that was a little on the bad silicon side.

The result I got were apparently a bug in BIOS settings and the system would have not been stable at all (sometimes you can for example both set a multiplier and still have precision boost boosting up) I think this was the case because I increased the EDC further, with lower temps and haven't...

BREAKING (Good or Bad) NEWS. I decided to see what was holding the CPU back and went to increase EDC over the supported specs of the Mortar B450m which is 168A. I went to 174A and indeed, I reached the boost clock of 4.3 even on 2 cores at the same time for some ms. So the thermals might be...

Same as still for many View: https://www.reddit.com/r/reddeadredemption2/comments/drzghz/pc_rockstar_launcher_exited_unexpectedly/

The issue is spread over months so I already went through many updates. Right now I have the latest one 1.9.27.1033 since I tried to run Red dead 2 (without success to this day) That was a bad choice of word. I test single thread perf using PCMARK10, Cinebench single thread and...

Yes but it is not my main concern as it only happens when using ALL cores at the same time. I on my side just want a few cores around 4.25 or a songle reaching consistently 4.3 when browsing for example. During these use case, I am below 70C

We already discussed MB compatibility and out of the box expected performance. Anyway, I don't reach out of the box perf using PBO which sets EDCat 168A and TDC at 114A (Power limit is at 1000W) and from the hwinfo64 screeshot we can see that 140W was easily achieved (and for single thread...

Use it for finding max temp all core The temps are for so 16 thread see above, win pro 64 1903 build 18362.449 (but the issue is since the building in may) cf question and thread : 650w gold seasonic, power plan balanced default 100% max cpu state, min cpu state 5% Did clear cmos before...

For info I just tried to put all fans on max from the start (not just when reaching 70 the default) and put the case open in front of the window with air at around 10C. I did get cooler temps : all core stress: around 68C without PBO and around 80C with PBO But the boost clocks where identical...