Recent content by P_1___

You say the radiator went out , but not what happened. Did any of the coolant leak onto the board?

To me It sounds like a short somewhere. As far as the led blinking when you hit the power switch while the board is disconnected, it' more than likely, residual power residing inside the capacitors on the board releasing their charge. Try removing EVERYTHING from the motherboard The video...

Beca Because XBox doesn't have an app that adjust the voltage to fans you would need to add/install a switch within the wiring. The same way you would adjust the lights to dim in a room , you would slow the fans . A knob type or slider type switch , that adjust the voltage up & down. They are...

What size Power supply do you have. It sounds like it doesn't have enough to supply the card A 250watt PSU will run a PC with an R7 240, but with the average RX 580 8G OC it needs at least a 500 watt PSU https://us.msi.com/Graphics-Card/Radeon-RX-580-8G/Specification

Just in-case you didn't do it yet..... There are as many tools out there today to delete data, as there are drive manufacturers But, whatever tool you do use to wipe it, always look at the tools information on how it's done. When data is written to , accessed from , and/ or stored on a...

I read where you say you have BOTH , the case speaker & the CMOS jumper on order. The CMOS jumper ( OR SWITCH/BUTTON) is just a momentary switch , like a doorbell, that crosses 2 connections. , It can be done manually on the board itself, by using any jumper. Most boards have a jumper already...

oops didnt see Dev

did you try using onboard video yet ?

first, try UNPLUGGING the computer, and then press the power button & DVD button a few times. ( Residual power left in the system after recent system changes have been known to cause interference) --------------------------------------------------------------------------- If that doesn't help...