Paperdoc

Latest activity Postings Featured content About Trophies

• • P

    Paperdoc replied to the thread Question HP laserjet 3302 FDW - scanned documents have a gray background on text?.

    For documents with only black text on a white background, ensure that the scanner it set to do Black-and-White scanning, and NOT...

    Yesterday at 12:43 PM
  • P

    Paperdoc replied to the thread Question HP Officejet Pro 8600 - - - color/black and white selection doesn't change anything ?.

    I am used to this issue with my last colour laser printer from Lexmark, and my current one from Brother. In both cases the choice to...

    Yesterday at 12:34 PM
  • P

    Paperdoc replied to the thread Question AIO + 4 Fans - How to find the sweet spot under 100%?.

    Basically you want to be sure that the fans CAN cool your CPU properly (NOT reach the thermal limit of the CPU chip) even at the very...

    Yesterday at 12:21 PM
  • P

    Paperdoc replied to the thread Question Any risks using 2 out of 3 magnetic fans ?.

    As BFG-9000 says above, any fan can be mounted to blow in either direction so it can be either intake or exhaust. The "reverse" label is...

    Yesterday at 12:16 PM
  • P

    Paperdoc replied to the thread Question Fan Speeds Capped Below Max RPM?.

    First, the web page for Corsair LL120 RGB fans...

    Tuesday at 3:35 PM
  • P

    Paperdoc replied to the thread Info Is your Logitech trackball not as responsive as it used to be ?.

    Laser mice does not quite make this all moot because you still can get dust collected in the "window" on the bottom so the mouse cannot...

    May 17, 2025
  • P

    Paperdoc replied to the thread Question ThermalRight Mijolnir 360.

    Aeacus has it all right above. Just two items to add. IF you have the rad fans connected to CPU_FAN1 as recommended for that board...

    May 17, 2025
  • P

    Paperdoc reacted to Aeacus's post in the thread Question ThermalRight Mijolnir 360 with Like.

    Where did you connect the rad fans? Holy bible of AIOs tells you to daisy-chain the fan power cables and plug them to CPU_FAN header...

    May 17, 2025
  • P

    Paperdoc replied to the thread Question Pump orientation and more ?.

    I am surprised that the 3-pin CHA_FAN header can NOT control speed of its fans, but that IS what the manual indicates. Not a common...

    May 15, 2025
  • P

    Paperdoc reacted to kanewolf's post in the thread Question Using an old printer on a network with Like.

    There are SO many used parallel print servers on e-bay, I would never buy new ....

    May 13, 2025
  • P

    Paperdoc replied to the thread Question Using an old printer on a network.

    Searching for "parallel port network print server" on Amazon I found two models. I used one years ago on an HP LasetJet from the early...

    May 13, 2025
  • P

    Paperdoc replied to the thread Question Fans are too loud ?.

    Glad to hear this is resolved and working.

    May 13, 2025
  • P

    Paperdoc replied to the thread Question Fans are too loud ?.

    So the Hub board has a power connection from the PSU, as expected. But did you ALSO use the two-headed cable supplied with that board to...

    May 12, 2025
  • P

    Paperdoc replied to the thread Question Front 2 fans stopped working after installing Gigabyte Control Center.

    One thing to look for as a diagnostic aid. The NORMAL sequence for any fan at start-up is that it starts at full speed for a short time...

    May 11, 2025
  • P

    Paperdoc replied to the thread Question Fans are too loud ?.

    Sorry, I got confused. The Hub does have eight motor ports, and you say you are using seven of those for case fans, right? Of course the...

    May 11, 2025

  Show older items
• Loading…
• Loading…
• Loading…
• Loading…