Recent content by Ragazo

So, there's nothing to be worried about ? In that case thanks a lot for the help. :)

I tried a small FFT and temps after 30mins the temps were at 80C and stayed there.

The option took by default was "blend (all of the above)" which contains small, smallest, medium and large ftts. Then there is two options greyed out with one activated which is "disable AVX-512" but only this one.

So i tried repasting the cpu (with a noctua paste), it didn't change anything so i tried a noctua air cooler (NH-U12s) that i had on hand, the result were the same; after 35mins of prime95, i was between 79-80C. What was strange was that at some point i hit 80C and then after 2mins it went down...

85C after 10mins

I tried letting the pc open form every panels (not the top one, it can't be remove) and it stabilize the temps between 44-46C when before it was moving between 45-52C

I have a corsair H100i pro AIO. The motherboard is a gigabyte aorus x570 elite and the version of the bio is "F11". And the case is a be quiet dark base pro 900 rev.2. In term of airflow there is two fans in the front, one in the back, and the AIO on the top but the case is closed almost...

Hello, i have a temp issue with my ryzen 3600. On idle the temps sits around 55C, while in prime 95 the temps will go up to 85-90C. I did put thermal paste (thermal grizzly if i recall correctly), i aslo tried to screwing as much as possible the aio to the cpu and the fans and pump are working...