Recent content by ReignOfHell

OK, after a little research I'd need to buy something to connect ALL 3 fans to a header, then to a controller (since the MOBO doesn't support RGB). The Razer controller is DEFINITELY what I'd need for lightning, however I'd need something to combine the fans into an A/RGB Header, then into the...

Just checked online and those are NOT A/RGB, but is a Fan Curve Header -_-, So I'd need to get her to buy a 3 pin A/RGB header PLUS a controller to use for it. Sheesh, this is a lot of effort for something that (in my previous build) should work straight from the 4pin connector on the board :/

Yeah I looked those up just now, and while the Razer seems a little pricey, it would definitely do what I'd need it to do. The Cooler Master one would definitely not work as the header those fans are connected to, are 4 pin.

Sorry for the delayed response but; The PC came with the fans, it's a Corsair Carbide Series Spec-DELTA RGB Tempered Glass case. https://www.amazon.ca/gp/product/B07KGSJRC3/ref=ppx_yo_dt_b_asin_title_o06_s02?ie=UTF8&psc=1 ^This one to be precise. I didn't install the fans myself since they came...

I recently made a build i made for my sister, and after i had everything installed, I found out that he motherboard I gave her does not have RGB, or RGB rainbow slots to plug the header into (It was an older motherboard from 2012 that i used in my previous build), however I don't use RGB/ARGB so...

Yeah the HDMI cable seemed to be part of it (though it still works on other pc's), so i switched to another, it happened briefly with the new cord, but no issues since. What would be a reputable brand for said cable though; just in case it decides to act up permanently in the future? As for...

I just tripped over the wire (i had it set up to a projector and raised), and now the hdmi port on my GPU is loose, and the 'No Signal' box is appearing, even though the desktop/windows are showing fine. I looked online, and it seems like the 'tightening' tabs in the HDMI are loose, but I tried...

It COULD be a setting in your bios making your fans only spin at a certain temp, just a possibility. My Motherboard has that :/ Maybe just a loose wire too since motherboards are very finicky, especially with the 3 pin fans in 4 pin slots.

Why am I not surprised it's something that simple. :/ Thank you kindly sir or ma'am.

Honestly, that never even occured to me xD. I will try that out. Edit: Huh, all of my PCI-E cords for my RMX-850 have the extra 2 prongs o.o

Nah, i was having some mouse issues that i fixed, wasn't sure if that was a possible issue, since i had issues with my 1600hz DDR3 ram when i used to use my old ASUS P8Z77-V LK mobo. It caused issues, and i figured that was the culprit, however; the mouse issue has since fixed, and i haven't...

Setup: i5-11600k running normal 3.9-4.9 ghz, no OC, no XMP, CPU MSI MPG Z590 Gaming Plus Motherboard G.Skill Ripjaws V Series 32GB DDR4 3200hz Ram (16 CAS , running at 2133 mhz) MSI 1650S Gaming X 4GB GPU (I always run it at 110% power limit, with +75 core clock, and +175 Memory Clock, and...

Yeah, i figured so. Sometimes its worth playing the waiting game so you dont have to deal with manufacturer RMA if you get a dead one right out of the gate, or if a sale comes within that 30 days on a better variant.

Ah, so that's the main reasoning behind making the K variants. Ah well, 4.3 should be more than enough for the forseeable future. (i would shell out for the 3770k, but i got my 3770 for an absolute STEAL on my local classifieds for 75$. on newegg and amazon it was well over 300$) The Fuma2 on...

Thats quite an expensive cooler though in comparison to the Noctua/Hyper 212 Evo midrange/high end ones, looks sexy though not gonna lie. I have another question though; I know Newegg is one of the 'top' reputable sites for PC parts, but i've heard some people get lemons from them and have to...