Recent content by REVLX

The motherboard is just H310 M A rev 1 not 2.0 so this is it https://www.gigabyte.com/uk/Motherboard/H310M-A-rev-10#support-dl What's really weird is I'm running the same test and I swear it's lasting longer and not throwing up the error anymore but idk. It did show it even without running a...

Bios is F12 (Latest), The BSOD's occured mainly in standby (the % never moded up so couldn't get dumps) but one of them was during playing CSGO which I am pretty sure this system shouldn't be struggling with. We did also think It could be the PSU so idk. But I believe WH info looked okay. But I...

First of all I have not overlocked anything, but I've seen people here talk about it in their scenarios so maybe somebody could help. In order to figure out a BSOD, I got advice from a software mod in which we did a memtest, HDD test, SSD test and a CPU test which all passed apart from Prime 95...

It could be due to me turning off the plug at night, I don't know what to increase the voltage to in my case since he mentions that if it was 1.5 for that that other guy to change it to 1.525, but Bios says my ram is on 1.2V on default and CPU is 1.020V on default

I don't know if this is relevant but ever since this pc was built, when it turns on it always lights up then lights off almost like it turns itself off and then turns back on completely.

Yeah that's what I read but it was just generic do a memtest etc, I mean I might re read it to see if I missed something

Hmm see I didn't get a BSOD during the test it just reported it as an error, but it doesn't provide like any further advice apart from running a memory test which I've already done

Thanks a lot, should I contact Gigabite support in my case?

Would it be best to load BIOS and load optimized defaults just in case? or am I just suggesting stupid things xD

Never altered anything in BIOS or ever used autotune so I can confidently say no.

I don't think it was running and the log most likely ended there. Good news and bad news tho I just ran a stress test with prime 95 and in one of the tests it said hardware failure detected, rounding was 0.5 when the expected needed to be less than 0.4. I believe this was worker #3 so 2nd or...

So my PC just froze, heres a log file from the HW thing no BSOD but was weird - log

I am unsure what to do with Prime96 because it looks confusing xD. Do I just do a stress test? I haven't checked the case in a few months so should probably do that, although I remember it not having barely any dust after like 2 months use.

Ive run it to log until a crash - but I did also render a video and had a look while that was going on - imgur

Kingston Test - Everything was on a full bar on green so I assume that's good apart from tempature which was still green but value of 70. WHinfo - I saved a report which is here.