Recent content by robollama

Best answer selected by robollama.

Alright well it was due to a modded 6950 to 6970 bios, I used the recovery bios and finished the mobo bios update and it works fine.

Alright I enabled EIST and C1E and switched over from manual voltage to voltage offset of -0.030. There's the VID reading I got (1.3561) vs. the actual voltage received (1.280) under full load IntelBurnTest on High. I've read like 10 different guides but I'm still unsure, what should I...

Ignore the TMPIN3 max temp, it's an error sometimes caused by having AISuite2 running at the same time. This is after a Intel Burn Test on High for 5 runs. I'm only talking initial stability. I'll do an hour test then an overnight prime95 test but I need to know if those numbers look OK? The...

Via web apps? I used USB :p

Nope didn't help. guess it's dead. :/ Thanks for the help guys...

OK I removed the flash drive and tried but same thing. I plugged the flash drive back in, removed my 2nd stick of ram and moved 1st stick to the A1 slot and booted while playing with the MemOK button and my dram led flashed red for a while but now my computer at least stays on without...

I didn't reset them to defaults no. :/

I tried updating the BIOS on my P8P67 Pro using the EZFlash2 tool with a FAT32 formatted flash drive and now I'm stuck in a restart loop. It said the update was successful and that it was now restarting, but it just keeps restarting over and over. I tried unplugging my SSD (OS drive), HDD(Media...

Best answer selected by robollama.