Ignore the TMPIN3 max temp, it's an error sometimes caused by having AISuite2 running at the same time.
This is after a Intel Burn Test on High for 5 runs. I'm only talking initial stability. I'll do an hour test then an overnight prime95 test but I need to know if those numbers look OK? The vdrop/droop looks a bit high at .06?
Here's my mobo settings:
blck - 100
turbo ratio - by all cores - 45
PLL overvoltage - disabled
EPU disabled
enhanced intel speedstep technology - disabled
c-states - all 3 disabled
line-load calibration - high
VRM frequency - fixed - 350
phase control - optimized
duty control - t.probe
CPU current capability - 100
CPU voltage - manual - 1.3
VCCSA voltage - 0.925
VCCIO voltage - 1.05
CPU PLL voltage - 1.8
PCH voltage 1.05
CPU spread spectrum - disabled
Turbo - enabled