Recent content by rohtua

H Thanks, I've tried it that way and there's no popping noise. Where the outlet is for the PS4 is awkward to get to which is why I normally just unplug from the back of the ps4. In the past it's never made any noise when being plugged in to the PSU second. Looking through the back grill I...

Hi, I recently took my PS4 apart to clean the fan (following this teardown guide: https://www.ifixit.com/Guide/PlayStation+4+CUH-1200+Entire+Console+Disassembly/52475). I went as far as step 8 to get access to the fan and clean it out. I did not disconnect the PSU from the motherboard. Since...

Hi, thanks for that. Just a bit of an update really. I've been playing around and think I've worked out whats been going on. I think that changing the clock and voltages wasn't working because I had PBO turned off. I was reading about how the BIOS will call for higher voltages, amps on boot than...

Hi, thanks for the response. Can I just ask when you say 1.2V would be too high do you definately mean high or is it too low? Only because you initially say the default peak voltage is 1.45V. You don't know what settings Ryzen Master actually alters do you? If I set 4.2Ghz clock speed and peak...

Hello, I'm looking into doing a slight overclock on my Ryzen 5 3600. I'm currently running it on a Asus Prime X570 Pro with a Noctua NH-U9S cooler. When I first installed the CPU I was seeing quite high temps at idle and under load (around 50C at idle upto 85C using handbrake). Looking...

No. Its whichever one I put a disk in second. If I'm just using one disk I can put it in either drive but if I then put a second disk it wont read regardless of which drive it's in.

Hi, I have two blu-ray drives in my computer. A Pioneer BDR-209D and a Pioneer BDR-211M. I have an unsual issue where I can't put two DVDs/CDs in the machine at once. If I put Blu Ray discs into the drives it works fine. But when I put in a CD or DVD it will read one and but not the other. It...

Hi, I'm using corsair LPX memory in my desktop (8gb sticks). Recently I've been experiencing BSOD on windows. I'm trying to work out what the problem is. I've checked my drivers and they're all up to date using the latest version. I think it might have something to do with the blu ray drive...

Hi, I've reseated my CPU and reapplied the thermal paste as well. My CPU temps now seem a lot more stable. I'm seeing 40 degrees at idle/general use (although it does spike up to 50 when opening applications or using some biggers programs like photoshop) but its not jumping up and down whilst...

Thanks for the responses. I've installed Ryzen Master as suggested and when I opened it the temperature was showing as 41 degrees.... but it does seem to be jumping around every second or so, showing 40ish then jumping to 50 and straight back down. Interestingly after installing Ryzen Master the...

Hi, I'm running a Ryzen 5 3600 on an ASUS Prime X570 Pro motherboard. As a lot of people seemed to have experienced with Ryzen it seems to run fairly warm at idle (I'm seeing between 50-60 degrees normally). At the minute I'm using the stock cooler that came with the CPU. When under load...