Recent content by Sandeep Datar

Quick update on this issue. I replaced the motherboard and the PC is alive , up and running. Thanks Phaazee88 for the tips

Thank you. So what would you suggest as next steps? Try replacing the mother board?

What do you mean "killed a part with ESD" ? Pardon my ignorance :-)

updated the specs- Nvidia RTX2070

When connected the green and black wire with a paper clip the fans started rotating on the case and the psu. I also tried connecting another 600W PSU but it failed to start the PC.

updated the thread with system specs

Hi All, I recently moved houses and when I tried to start the PC in the new house it was stone cold. It has been working great for the last year and half before the move Here are the few things i tried. Made sure all the connections are fine Made sure the switch and reset connection from case...

Yes! That's what happens when you are building a PC late at night and tired! I had indeed plugged the wires upside down. Thanks all for your inputs.

Thanks JitteRS and Barty1884. The cable is an using has pcie written in the other end. I think JitteRS is probably right. The cables do look upside down. Will check tomorrow and let you know.

I am setting up a new pc See attached image (https://photos.app.goo.gl/SB1BPu3UZLHjn4oD6). I connected the PCI cable to the pins marked by red arrow and the graphic card did not get any power. Moved it to the bottom 8 pins marked by green arrow and it worked. Should it now work in either of...

Thanks @bignastyid

@Tacticall993, I guess thats the kind of dumb things first time builders do :-)) . Plugged in both 8 pin and 6 pin. The fans are now running and the display working !! Thanks a ton guys, you are awesome. Thanks to Tomshardware too ! This successfully completes my first build. I could not have...

I see two power slots on the card. One has 8 holes and the other has 6 holes I have plugged in the 6+2 pin power supply configuration in the 8 hole slot. Are you suggesting I put one more 6 pin power supply in the other 6 hole slot?

I have a EVGA 600B 80 plus - Its a 600W power supply. Here is my partpicker configuration http://pcpartpicker.com/p/XQfzjX That suggested power consumption of 324 W

I just built a new system - ASRock Z97 killer Mobo, i5-4690K cpu, G.Skill ripjaws x 8MB ram, MSI GTX 970 - 4GB graphics card Everything is working well except that the MSI GTX 970 graphic card is not being detected. I tried both PCIe slots, The 6+2 power cable is inserted. protective plastic on...