Recent content by Sapling09

I decided to get a 32GBx2 6000 MT 30CL kit with a certified EXPO. Hopefully I won't run into stability issues

This is actually pretty funny and kind of embarrassing. I am glad you called me out on this, despite this being a completely unrelated issue. I was stuck in the good old north-bridge architecture where all the high-speed devices shared the same bus. I haven't looked properly at mother board...

I am well aware that the integrated gpu usually shares memory with the GPU, but I have never had this problem before. I have been running this build for quite a while and only recently I started noticing high memory usage. That is why I always had the iGPU enabled in the bios cause I never...

Okay, turns out that disabling my iGPU cut down the memory usage by 50%. How is this possible? The iGPU was enabled, but my dedicated was used and the monitors were plugged into the dedicated GPU only. Also, windows reported only 1gb HW reserved, so how could this have affected the memory so much?

Yes, No, the OS was installed with the ethernet plugged in. Yes it did install the drivers remotely from the internet. In addition to the drivers it detected on its own, I installed my motherboards: LAN drivers, Audio drivers, Chipset drivers I also installed Nvidia drivers through nvidia...

Hey. I'm dealing with unusually high memory usage on Windows 11, occurring immediately after boot. As a developer, I maintain a clean system with minimal running applications. Despite this, my memory usage is abnormally high, and more frustratingly, I can't trace the source. I recently...

Update: I used the screws you mentioned and it fits perfectly. At first they seemed a bit small and thought they would not hold it in place but it turned out they were alright. Thanks for the help

Thanks. I think I know which screws you mean. That kind of explains everything from why the mounting holes are too small and why they are being provided. I haven't used them because there is absolutely no mentioning of them in the manual. I will try reinstalling the fan using those screws and...

Hello. I bought this new case and I ran into a problem with the front panel. There are probably hundreds of holes for screws at the front panel but I could not find a way to align my ARCTIC P14 PWM 140 mm fan so I can secure all the 4 mounting holes. Best I managed to do was 2, and even then it...

I still need help. Any suggestions?

Hello guys. I have been hosting games for quite a while and never ran into an issue such as this one. Basically the problem is that my ports are forwarded to my local IP address and I do not seem to be able to connect with my public IP address. The game is using port 27015, which is default...

Anyone could help me?

I am still looking for suggestions. Any help would be appreciated. Does nobody have an answer?

I will try it out and test it. I will make sure to let you know about the results later. However I am open for more suggestions since I believe this will not work.

Yes I do. I have C and D drives. Except they are not physical but logical. I have one HDD with 2 partitions to be more specific, and YES I install ALL the games on the D drive. May you tell me how did you fix it? By installing games on the C drive?