Recent content by semogen

The voltages I've tried have been in the 1.35-1.41 range none work. I've tried SOC at 1.1 but I'll give 1.2 a go, that's probably the highest though correct? nothing gets me over 2400 so far I updated to 1407 (from earlier this month) thanks update: SOC @ 1.2, DRAM @ 1.4, Auto timings or DOCP...

Got the new RAM in, same issue as before. I can't get it above 2400Mhz, it's like a brick wall at the divider. Unsure what to do

That's an interesting idea... although I've opted to just order a set of F4-3600C16D-32GTZN (same ram, different die / timings) and will try to return this set. Still gonna try messing with it a bit more. I got it up to 2400mhz (sigh). I'll update once I get the new set, thanks for the tips semo

Well, I finally got to try the above (loosened the CPU cooler a bit more) and I still am not having any luck, even down to 3000mhz. Not sure what I'm doing wrong, unless my CPU is bad - trying to figure out how to tell. I checked the pins again and didn't notice anything off. Coming to the end...

That's pretty much what I did. With the wraith cooler on I couldn't get the RAM to boot, so I swapped it out for a kraken. I checked the pins as well as I could safely do a few weeks back when I was originally trying to troubleshoot that problem - nothing obvious to an untrained eye. I suppose I...

No OC or anything else changed in the BIOS for that matter. Everything is brand new (a few weeks) and the RAM is listed on the ASUS QVL for the X570-E. Could have something to do with the pressure on my CPU from the cooler? I had to loosen it a bit to even POST originally... temps, performance...

Let that run overnight, zero errors, no issues reported at all. What are my next steps? I assume that means it's more likely the MB or CPU. I sure hope not right now with all the things going on, haha. I've attached the report, also the DRAM calculator settings I've been attempting to use...

I will give this a try tomorrow and report back, I have a feeling it will come back all good. I've ran all sorts of memtests on it already, but not actually from a stick. That sucks about your board, I would hate to have to do an RMA right now. I'd rather just order a new part, haha. Cheers

Hey guys, I recently built a rig based on a 3900x and I am having a hell of a time getting my memory stable at anything other than the default of 2133mhz. Parts: AMD 3900X Asus Strix X570-E G.SKILL TridentZ Neo 3600Mhz C18 (F4-3600C18D-32GTZN) I had it running for a couple of weeks on...

Hey guys, I've been having a lot of trouble with my build for a long time (couple years). Some games cause my monitor and audio to go turn off. After a couple seconds of silence I resume hearing the game audio in the background but the screen does not come back on and the computer appears to be...