Recent content by shep611

you are most welcome and i hope this solved your issue if it did not then only other thing i can think of is your hard drives are going bad or the ssd is going bad .. You could encounter this error if a hardware failure is causing the platters not to spin fast enough during power up. so check...

im no expert on the mother board part but pins are on the cpu side not mobo side and that top pic doesnt look well to me but again no expert and as for paste yea try arctic ceramique . back top the pins now look at the cpu see if any are bent if they are and they match up to that spot on mobo...

which brand CAIG Labs Heat sink Compound Silicone Based did you get ? reason i ask cause many of the silcone based ones have a lot of conductivity in them personally i would use artic silver or another newer brand . having to much conductive material in paste for cpu could damage it .

by any chance you have not over clocked your cpu? if you have then a fan simply will not do the job keeping it cooled

by the sound of things you did your own build correct ? and if you did and you installed your cpu in bad it will do the same thing even if you install same cpu in a diff mobo

MERGED QUESTION Question from eraz_99 : "Computer Keeps Shutting Down and I have already cleaned the fan"

i have had this issue even tho i had enough watt power to run my system i was finding my self from time to time hitting the button several times to get the pc to boot up right . it was my power supply that was the issue now i have a 750 evga gold rated and have had no issue since . have you...