-
You heard it here first: Black Friday 2024 has arrived!
Latest activity Postings Featured content About Trophies
-
-
spinnnerrr91 replied to the thread Question Newly built PC lags.I cleared the CMOS and downloaded the drivers and utilities for my motherboard, but I'm still getting the same issues. There were some... -
When you built the system did you go to the motherboard manufacturer's site and download all the applicable drivers and utilities...
-
This is what I recently built. Your PCPartPicker link doesn't work since it lacks and extension to your particular build. I've tried a...
-
spinnnerrr91 replied to the thread Question Newly built PC lags.I fixed the link. I downloaded the BIOS version F10, but did not clear the CMOS. I actually did not do any of that yet. That may be...
-
This is what I recently built. I updated Windows 10, BIOS, GPU drivers, and storage firmware via Samsung Magician. I've tried a fresh...
-
spinnnerrr91 reacted to CountMike's post in the thread Question What type of connector is this? with
Like.
Shorter the wires and less inline connectors, the better. Also have to take into account wire gauge. It caries DC current so it can... -
spinnnerrr91 replied to the thread Question What type of connector is this?.Thanks for sharing those. I'll definitely buy it. So what would cause my PC to lag? All of my drivers are updated. I can't figure out...
-
spinnnerrr91 reacted to CountMike's post in the thread Question What type of connector is this? with Like.
You already have an active cooler on it which should be more than enough. Do you have heat transfer pad between SSD and cooler ...
-
spinnnerrr91 reacted to Eximo's post in the thread Question What type of connector is this? with Like.
That should be fine, what it was made for. However, I would get a direct PSU to 12HPWR cable to make it cleaner...
-
spinnnerrr91 replied to the thread Question What type of connector is this?.Yes, there's a heat transfer pad between the SSD and cooler. I went a little overboard and put a heat transfer pad underneath the SSD...
-
spinnnerrr91 reacted to Eximo's post in the thread Question What type of connector is this? with Like.
Take the fan off and see if it is 5V or not.
-
spinnnerrr91 reacted to Zerk2012's post in the thread Question What type of connector is this? with Like.
5 volt from a SATA connector.
-
spinnnerrr91 reacted to Eximo's post in the thread Question What type of connector is this? with Like.
That is true, the 5V is in the middle of a SATA cable, but I suppose they could have routed from any point on the edge connector. 5V...
-
spinnnerrr91 replied to the thread Question What type of connector is this?.That makes sense. So I guess my 990 Pro idling around 50C is considered normal. Here are some photos of its location on my mobo. Any...
-
spinnnerrr91 reacted to Gururu's post in the thread Question What type of connector is this? with Like.
I have the 990 EVO and it shows 34/53 for drive temp 1/2 in HWinfo64. My ambient temp is 22. It would sit under a video card but I...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
Latest posts
-
-
Question Best pocket/compact digital camera for landscapes and sports events?
- Latest: christiandransfield
-
-
-
-
-
Facebook
Twitter
Instagram