Recent content by ss996su

PC SPECS- CORSAIR MP510 240GB M.2 NVME SSD GIGABYTE B450M DS3H CORSAIR TX650M GOLD PSU SAPPHIRE NITRO+ RX5700XT 32GB CORSAIR VENGEANCE LPX 4X8GB 3200MHZ XMP1 RYZEN 5 2600X OC 4.4GHZ SEAGATE BARRACUDA 2TB 014 Installed OS without any other drives plugged in, fully installed, when it restarts it...

Also another issue, With radeon chill off I see temps as high as 80C core and 107C hotspot, and one more issue when chill is off the framerate of the game i play shoots thru the roof, literally causing a black screen im worried it might kill my monitor I saw 300 FPS in modern warfare and in...

So I have the Sapphire Nitro RX5700XT OC SE, I Haven't overclocked the card at all, it's stock Freq is 2.1GHZ, but Sometimes I see it hit 2173mhz even on GPU z and on wattman statistics, it doesnt heat alot I have chill enabled, but even undervolting down clocking doesnt seem to do much, It...

Nope aslong as you know what you're doing

DDU drivers and re install in a clean manner, uninstall any aftermarket gpu or cpu monitoring tool, clear caches, it looks like artifacting how new is the card and if new what are the temps? looks like its heating up, enable vsync if your monitor is onl 60hz, play around with settings and anti...

No replies OK

DDR3 and DDR3L is different RMA it and get a hyper x fury DDR 3 1866MHZ sticks its cheap. works like a charm, DDR3L runs at a higher voltage if you can get into bios change the voltage with your old ram and stick the crucial in there see if that works, if not might be DOA or not compatible with...

Replace the PSU corsair TX650M and put an RX580 in there or a geforce GTX 1660 you should be fine but 180 watt psu for photo editing and a gt710 is a very bad idea, it wont do anything, it is crap.

Send screenshots of the GPU-Z interface and also show what RX570 is it?, What AIB? sapphire? powercolor? might be a fake or bios corruption if it is dual bios switch the bios on the little switch on the GPU, might also be thermal throttling due to faulty sink or if it is second hand i suggest...

XMP on ryzen 5 2600x causes boot loops and green screen during gaming, built my first build it looks beautiful <<edited>>, got two sets of ram, hyper x predator 3200mhz 2x8 and corsair vengeance 2x8 both on discount new ddr4 btw, tested both rams causing boot loop green screen, tested together...

All timings are correct in bios also set to 3200 even tried 1600 to be sure and worked my way up, no post if dual bbut post if single channel

I recently built a Ryzen 5 2600x based build, Bought 4 dimms 4x8GB from hyper X and already had 4x8GB from corsair DDR4, I cannot see any post on dual channel slots A2 and B2 but have post and OS on A1 B1, my issue started when during my build while trying to remove a screw that was somehow so...

if that doesnt work fresh install windows and reinstall drivers, make sure the GPU is not thermal throttlint you will loose performance, make sure you have no overclocks and make sure once you DDU and wipe drivers and reinstall adrenalin from AMD, uncheck auto fan control and make it 100% from...

uninstalll every software you have downloaded for temp and fps recording and gpu-z or whatnot including MSI afterburner AMD drivers dont work well with other products and software for fan control and overclocking or monitoring, remove every previous display driver and reinstall adrenalin...

should be fine get more ram incase