Recent content by StativeDog

It currently does the same thing at every boot. It doesn't post and I cannot get into the BIOS anymore.

I'm using Tem-Tforce Dark RAM. It's a single 2400hz 16gb DIMM. I've used the MemOK and EZ XMP with no effects.

I didn't see any bent pins in the socket, and I checked the cpu for any damaged contacts and saw none.

I have the RAM in DIMM_A2 and have tried booting with the hard drive disconnected. I recently remounted the CPU, applied new thermal paste, and replaced the cooler. None of this seems to have worked. I tried to boot outside the case and got no new response.

I cleared the CMOS and was able to flash a new version of the bios. After that, I rebooted to check the boot order and am now stuck with a no post. Also, the GPU has had no issues when the PC boots successfully, I tried it without though and had no luck. I did manage to install the latest...

I recently build a new PC( I7-7700k, Asus Prime z-270-a, gtx 1060, 512 gb sata m.2, 2tb hard drive, 750w power supply, 1x16 gb 2400 ddr4 ram) and had everything up and running. I installed windows, all my motherboard drives, geforcec experience and my 1060 drivers,, steam, and chrome. After...

I just built my first PC ( https://pcpartpicker.com/list/F8Ng7T ) and it was all going smoothly. I tested the system before putting it in the case, managed my cables, and booted it up. At first, I was getting this screen ( View: https://imgur.com/a/5pHPm ) and had no ability to access my...

Ok, I tried that and got no beep or LEDs. Any other recommendations or should I go and get my money back for this motherboard?

I've tried using both onboard graphics and my gpu with no change in results. All the lights are off when I turn on the PC.

I recently build a computer (outside the case to see if it will post) and I can't seem to get anywhere with it. The motherboard LED's are all working, and all of the fans are spinning. My Hard Drive is also spinning up. I Don't have any beep codes coming from the speaker either. I've tried...