Recent content by Strahdvonzar

After a couple of days of testing , with minor changes in speeds / curves / etc , i think i have reached a good point and can call it a day. This is a screenshot while having pretty low utilization (About 1% as also indicated by the sleeping cores): Generally though the results are the...

@thestryker A few posts above yours i have attached a Screenshot that shows clock being at 1.1Ghz while idling. It seems that downclocking is working as intended. @Misgar It is on Auto. While being on Auto it is generally available for Vendors to apply OC techniques on their products which is...

Installed fans but still issues. I tried out though a test : Opened Case Lids. Room Temperature at 25 Celsius. NH-D15 at 100% speed with Both Fans installed. PC "idling" Only the Case Exhaust Fan on 100% and all the rest turned off. Temperature was stuck between 40 and 41 Celsius , clock...

@hotaru.hino There are for sure many ways to lower temps through various settings , either from my BIOS or from other Software that will generally throttle down the CPU in some way but i do not want to lower my temps by moving away from the default settings of a system. If the default settings...

After about one hour of light browsing and a couple of Youtube videos the temps are hovering around 47 Celsius and clock around 1.1 Ghz. While the youtube video was playing it reached a top of 49 Celsius at 1.5Ghz. Generally though temps were alternating between 47 and 49 Celsius and speeds...

After the installation of the NH-D15 the results are the following. Again after Clearing CMOS and with default configuration , no changes in BIOS whatsoever : Note : The following Screenshot is while idling In Cinebench : CPU Utilization : 100% (For 10 Minutes) Clock : 4.4Ghz (Through the...

@thestryker Generally my aim when building a system is to keep it "alive" for 6+ years with minimum upgrades in the meantime. Those high idle Temps are not a good indication for longevity. So , i went on and ordered the NH-D15. It was in my "upgrades if needed" list when i first decided what my...

@thestryker Money is not an issue , i am simply trying to find out if i have a "problematic" unit or a "misconfigured" one. If temperatures around 60 Celsius is something common for a 5600X while utilizing a Stock Cooler Fan and also while idling then i am not going to dig it any further. If...

@geofelt : Are you sure that we are talking about the same case? If you looked at Newegg it has most of the specs wrong. Sadly you will not find the official one in Coolermaster , there is a new model now, but here is the best review i could find that shows exactly the one i have with the right...

The results are the following after clearing CMOS : Idle Temperature around 58-59 Celsius Cinebench temps after a full cycle of 10 minutes peaked at 89 Celsius staying mostly at 88 Celsius. In the previous tests it would jump instantly to 80+ , whereas this time it gradiently went up to 80...

I will try clearing the CMOS and let you know how it goes. Regarding the mounting : I have already remounted it once. I need to point out that , when i went on to remount the Cooler the first time , the CPU was stuck on it , so that seems like a good proof that the mounting was not the culprit...

I have the Following Setup : CPU : AMD Ryzen 5 5600X Cooler : Stock Motherboard : MPG B550 Gaming Plus (MS-7C56) BIOS Firmware : E7C56AMS.1D0 ( 2023-04-28 ) Room Temperature : 24 Celsius / 75.2 Fahrenheit Case : Coolermaster Cosmos 1000 Everything is from a complete Upgrade a few months ago...