Recent content by Strattton

Sorry for taking so long, I took my entire loop and water block completely apart and everything is 100% clear and clean. However there was a lack of thermal paste on one corner of the die, the paste was in good condition still. I'm not sure if it didn't spread there, dried up, or was moved...

So how do you tell the actual temp then? Yes, when I'm in games the frame rate will go from like 100 at 1905 to like 70 at 1350. So when it's constantly going from 100 to 70 yes its like stuttering. The waterblock has been there since Nov 1, 2018 but I guess I can remove it and re-apply it.

I get a lot of stuttering and framerate drops in every video game I play. COD:MW 2019, PUBG, EFT, ect. I installed MSI Afterburner and the core clock fluctuates like every second and it makes games unplayable. Re-installed Windows 10 (1909 Build 18363.815). Used driver 432 after fresh install...

Cinebench R15 scores around 1350. Clocks dropping to 4Ghz about half way through. CPU-Z https://valid.x86.fr/ijje2j PC Pic https://imgur.com/7sJi13O Z390 AORUS ULTRA Max temp 79C clock ratio 47 Vcore 1.3V vccin 1.2v LLC Turbo AVX 0 uncore 4.4 MCE Off speedstep off Turboboost off Why is it...

Re-tried the VGA connection on the PSU and when using VGA 1&3 it boots up fine but not when using 1&2.

Yup, got my 1070 and tried two cables and got this message. Oh look, I used one cable with a 6 pin slave/daisy chain and it works... I treid every VGA cable combination on the PSU and always got this message.

^ Yup VGA 1 and VGA 2.

So here is my build I've been slowly upgrading https://pcpartpicker.com/user/Strattton/builds/ So previously I had an R9 270x which has two 6 pin connectors. I have an EVGA SuperNOVA G2 850W which comes with two 6 pin cables. So I opted to think that plugging in two separate 6 pin cables would...

OC'd 5820k to 4.6Ghz 1.32v; 1070 110% power draw@ 2Ghz. Both pull 300-350 watts and I don't feel comfortable with my 750w PSU at 90%. Should I upgrade to EVGA supernova G2 850 from the 750w version?