Toggle sidebar Toggle sidebar

TerryLaze

Titan

Joined: May 9, 2016

Last seen: Sunday at 8:41 AM

Latest activity Postings Featured content About Trophies

- TerryLaze replied to the thread Question Are the Intel 14900 (NO K) processors also overheating due to voltage problems?.
  
  But that's the whole point here.... In a mobo that can't overclock and can't overvolt an k CPU then that CPU will be safe. Although I...
  
  Sunday at 8:40 AM
- TerryLaze replied to the thread Question Intel Arc A380 with a Ryzen 1700X for video encoding ?.
  
  Everything uses either x264 or h264 (or the 265 variants) one is free the other one licensed, the one handbrake uses is free and is the...
  
  Jan 10, 2025
- TerryLaze replied to the thread Question Can you expand the memory on a Raspberry Pi 2GB board ?.
  
  ?? SD card? Because larger games need to read a lot more data and a slow sd card will cause longer waits, but it's not a guarantee, it...
  
  Jan 10, 2025
- TerryLaze replied to the thread Question CPU stuck at .53 ghz.
  
  At .53 Ghz of course your temps will be good, cooling matters because it might not work correctly forcing your cpu to run slow to keep...
  
  Jan 10, 2025
- TerryLaze replied to the thread Question CPU unable to reach base clock speed when battery is not plugged into laptop.
  
  It's pretty common for laptops to have lower display brightness and lower performance when on battery, that's how they get good numbers...
  
  Dec 28, 2024
- TerryLaze replied to the thread Question Why is my processor running 1000mhz above stock clock speed?.
  
  Did you do any changes in bios? Or did you even get into bios? It is rare on AMD platforms but the mobo might have come with an auto...
  
  Dec 28, 2024
- TerryLaze replied to the thread Question Intel Arc A380 with a Ryzen 1700X for video encoding ?.
  
  Huh?! If you want to use the CPU for encoding then the GPU doesn't matter at all. If you want to use the GPU the 1050ti has x.264...
  
  Dec 28, 2024
- TerryLaze replied to the thread News Ryzen 9 9950X3D purportedly surfaces with 5.65 GHz boost clocks — leaked specs inlcude 96MB 3D V-Cache on a single CCD and 170W TDP.
  
  We have seen intel's answer for years now, they increase the cache bit by bit instead of all at once like amd does, that way they don't...
  
  Dec 28, 2024
- TerryLaze replied to the thread Question CPU not reaching full speed on Cinebench.
  
  Intel has the base clock of the 14900f at 2Ghz...you are running at 2.5Ghz, it's running not only as intended but higher than that. As...
  
  Dec 6, 2024
- TerryLaze replied to the thread Question What to do about long movies.
  
  What software are you using for single disc movies? What file format do they get saved in? Certain file formats can easily be combined...
  
  Dec 6, 2024
- TerryLaze replied to the thread Question WIndows 11 doesn’t support my CPU ?.
  
  Depends on how fast "the industry" is going to drop support for 10, but one year should be fine, main thing would be if chrome or...
  
  Dec 1, 2024
- TerryLaze replied to the thread Question Which CPU should I get if I play RTS games with a lot of units ?.
  
  Yes, but. Higher core count CPUs generally will have higher single core clocks and more cache. Also newer intel CPUs will also...
  
  Dec 1, 2024
- TerryLaze replied to the thread Question SATA Options for an old (circa-2002) motherboard.
  
  Don't use any drive at all, get yourself an ide2sd card and use sd cards, those are completely transparent to the bios, al it sees is an...
  
  Nov 29, 2024
- TerryLaze replied to the thread Question How hot does CPU have to be to get BIOS "CPU overheating alert?".
  
  Mobo will warn whenever the CPU reaches the max temp that is set in the bios settings, doesn't have to be tjmax. The CPU will downclock...
  
  Nov 29, 2024
- TerryLaze replied to the thread Question What vintage games from the year 2000 can run on 2 cores 64mb ram and 4mb vram?.
  
  AND SBC (single board computers) which would also explain the 4mb vga since it would only be used to display text or something simple.
  
  Nov 29, 2024
Show older items
Loading…
Loading…
Loading…
Loading…