Recent content by TheCod3r

That all depends on the mixer you go for, something like the Behringer DDM4000 has multiple outputs and headphones too but comes at a price, around $350 USD but that would deliver true quality. In reality you can go for anything with multiple outputs so it all comes down to your budget and end...

Hi, yes that motherboard should fit with no problems

As stated above the fan would not cause this issue. The only possible problem could be that you have possibly damaged the CPU or another more likely problem would be the motherboard would have been damaged due to static coming from your body and hitting the board. Static is very under-estimated...

That splitter would work, however you will not experience true sound quality. My suggestion would be to buy an external sound card instead and configure Windows to play through both the headset and speakers at the same time. Another option is an external mixer with multiple outputs. Connect the...

It may well just be that the system speaker has failed. You could try replacing the speaker if you are able to disconnect it. The beeps are only used for codes and many people never use them nowadays anyway so I wouldn't worry about it, it wouldn't cause any diagnostic problems if you do run...

The problem seems linked to either your graphics (GPU) or your system RAM (memory). Try replacing your GPU or if you use an on board GPU try plugging in an external GPU card. If that does not work try replacing the RAM and see if that works (y) Thanks

Hi all! I have an M2N68-LA motherboard which has a CPU fan error come up during boot. The fans all work fine, however I cannot get into the BIOS to turn off the hardware monitoring because it just shuts down after a few seconds which is no where near enough time to load the bios and get to the...