Recent content by TheMemeMachine

Using an NZXT H710. At this time, I have a front 280mm radiator with fans in pull configuration as intake, and the fans Im looking for will be set as exhaust

Hello, I am looking for a set of quality 140mm fans with RGB. More precicely, I am looking for a pack of either 3 or 5 fans. I plan to use 1 as rear exhaust, and 2 as top exhaust (and it it's a 5 pack, I will replace my fromt 2 radiator fans) The fans should be as quiet as possible, move as...

Hello, I am looking for a set of quality 140mm fans with RGB. More precicely, I am looking for a pack of either 3 or 5 fans. I plan to use 1 as rear exhaust, and 2 as top exhaust (and it it's a 5 pack, I will replace my fromt 2 radiator fans) The fans should be as quiet as possible, move as...

Yes, the problem was in the 10 pin cable that goes into the CPU block. The right-most 2 or 3 pins were not making proper contact (I assume those control the fans). I just inserted it again and pressed really hard on those right-most pins and it fixed it. Be careful not to break them tho This...

Sure, here is an example. My friend comes over and we want to play a game where he uses a controller and looks at the TV while I use the keyboard and look at my monitor (the tv is not directly next to my monitor, its about 2 feet away), and we need to be looking a the same image, and in this...

Well extending does work but that is not what I am trying to achieve here. I need duplication

Hello everyone, I am trying to make a setup where i have my main gaming monitor and a tv on the side where I would like to watch movies and im having problems with duplication I have a 1080Ti, my monitor is an AOC AG271QX 1440p 144hz and is connected via displayport, and I have a 1080p 60hz TV...

The bios version is F3 8/29/2018. I installed the firmware update a few moments ago (and restarted the PC just in case) and the fans are still not spinning EDIT: I have now updated the bios to the latest version F8 5/24/2019 and still have the same problem

Hello everyone. I recently bought a Kraken x62 AIO and I installed it in my nzxt h710 case. I followed the instructions to the letter: -plugged the pump header in to the 4pin CPU fan header on the motherboard -plugged in the SATA header to the PSU -plugged in the first radiator fan to the 4pin...

Hello everyone, so I am curious has anyone actually tried this so they can tell me their results. I hAve an inwin 805 case, and currently I have installed the bequiet Shadow Rock Slim CPU cooler in it. The manufacturers site says that the maximum CPU cooler clearance is 156mm in height (to be...

It was purchased in another state originaly so I cant return it. The thing is, with the 100mhz downclock, in the top right corner of heaven benchmark, it says that the core clock is 1999mhz and memory clock is at 5405mhz, which seems normal to me. I am still not convinced it is a hardware...

Thank you very much for your answer. So what would be some issues if I were to drop the refresh rate to say 100Hz? You mentioned it would be performance and image quality issues but I don't understand what you mean by that.

Hello everyone, I have some questions regarding the 1440p monitors. I am going to upgrade to 1440p because the 1080TI is have is wasted on the 1080p monitor i currently have, and I am a bit confused by the refresh rate of choice. Most people recommend a 144hz refresh rate. Now, the 1080Ti will...

Hello everyone, I recently purchased a used Asus Strix GTX 1080 Ti OC edition. It was never used for mining, fans and LEDs work fine, the backplate screw sticker was still on so it was never opened and was in good condition overall, it was about a year old. I put it in my rig, installed the...

Hey I currently have a Cooler Master g550m power supply and will be getting a zotac amp omega 980ti card. Ive read some threads and used some psu calculators and some say i should upgrade to a 600w and others say i should use mt current 550w psu. I will not be doing any overclocking and will use...