Recent content by Tigerwarrior1

Quick Update for anyone with future problems:: I tested it with more compatible RAM sticks that are on the QVL list and decided to just buy an entirely new motherboard. I bought the B450M PRO-M2 and it ended up working perfectly with the same parts that I had at hand. So I'm assuming it means...

Hello! I just recently bought off eBay a fairly cheap MSI A320M PRO-VH that's been kept in good condition. I had a leftover Ryzen 3 2200g lying around with its stock heatsink and thought why not give it a home. I tried to breadboard with it and noticed the CPU debug light is on. Turns out the...

I put in an old ballistix ram kit in to make it post again. And I tested all the hyperx sticks for the A2 slot and only 1 stick would boot with it, which was the 3rd stick that wasn't in the pc during the update. I will give this a try to make it POST with dual channel.

I was using EZ flash 3 with a file installed on a USB stick.

At a glimpse the loading bar was at about 90%, then it shut off and gave me the beep codes

Quick Update: So towards the end of trying to update my BIOS my computer shut down and won’t post anymore, and will only give me 1 long beep, 2 short beeps every time I try to turn it on. And according to Asus, that’s a memory problem. I’ve tried every combination and I don’t have an extra pair...

I've read that the new Asus bios updates have been rather unreliable but I will give it a try.

Yeah, I can't get it to boot in XMP. My main goal is to just get it to run at it's advertised speed 3000mhz. I even tried setting the DRAM voltage to 1.4 and the SOC to 1.1, but still no boot.

The link for my ram lists the XMP profiles for 2666 and 3000 but I cannot get them to even boot with XMP enabled.

Here's a photo of CPU-Z and Thaiphoon. Also, you're right the kit is actually a 4x8. CPU-Z Thaiphoon

Sorry, I left out that I tried doing that with stock CPU settings as well. Didn't seem to budge, but thanks for the specification.

Hello! So let me start by saying that the kit I'm using is a set of 4x8 ram sticks (32 gb total). But I was only given 3 sticks (It was a gift🤷‍♂️). So for a while I ran with 12gbs of ram at 2400, even though the desired speed is 3000. Then I learned that ryzen really has a taste in high speeds...

So I had recently gotten my new monitor (MSI Optix G24C) and wanted to taste 144hz with a DisplayPort. But when I use the plug, nothing happens and the screen says "no signal." But when I use an HDMI, it's perfectly fine at 120hz. I've tried doing the power off and wait method, but still...

I forgot to mention I'm on an SSD. I guess I should reinstall since it's probably still got old hardware information on it. Thanks anyways man.

Hello community! So I've recently done a Ram, Motherboard, and CPU upgrade for my rig, but I still kept the same hard drives. With my old hardware, booting would take a max of 15 seconds to get to my desktop. After the upgrade, the pc speaker always beeps like it's the first post every time I...