Recent content by trawetSluaP

bequiet! fans are my go to. I'd pick these for your needs: https://www.overclockers.co.uk/be-quiet-silent-wings-3-140mm-pwm-high-speed-fan-fg-039-bq.html Also, regarding the RGBs, Phanteks now has an easier way to convert non RGB fans...

Thanks again for the reply, had a look at the XL R2 and unfortunately it won't do - I should've provided better info at the start. The case will need to house a 360mm and 280mm radiator and the XL R2 will not be compatible with either.

Hi all, I'm looking for a new case to fit an E-ATX motherboard and unless I go full tower it seems to be pretty slim pickings in terms of compatibility, but at the same time I'd prefer a Mid-Tower size case, or as close to as possible. I love the look of the Lian Li 550X but would be wary of...

Contact EVGA as they'll be the best people to help you. It's possible it's a simple solution or the card could be faulty.

Hmm, so you did a clean install of drivers? Have you tried removing and reseating the GPU? Also have you tried running benchmarking software like Unigine Heaven to see how it runs?

Hi all, May start OC'ing the 6850K I have soon and was wondering about the voltage requirement. At stock the 6850K is using 1.115v, does that seem a little high? I bumped up the Core Speed to 4.0 using the same voltage and was able to boot and run CPUz's stress test. Secondly, the RAM I have...

It's not horrible in my experience, just very taxing and were lower end GPUs get really get tested.

Grab an EVGA G2 or above unit. They use Superflower as the OEM. Plus EVGAs customer service is insanely good.

Depends on the settings you want to run. If you plan on upgrading to a 1440p monitor and want to play on Ultra settings a 1060/1070 won't cut it. If you're gonna stay at 1080p for a while then I'd still get a 1070 as although it may be a bit more expensive it'll last longer. With regard to...

A fresh install of the Nvidia drivers using DDU to clear the old ones never hurts.

Sapphire R9 290X Vapor-X http://www.sapphiretech.com/productdetial.asp?pid=D2A0C6FA-1869-43E2-A153-789438696A42&lang=eng

I'd contact EVGA Tech Support then.

Are you making sure to plug a cable from the GPU to the monitor instead of the motherboard? IT's easily done. Also, try the different ports on the back of the GPU?