Recent content by Vulpes vulpes

I have just recently built a new rig and while monitoring through HWinfo to check to see everything was running fine I've noticed that clock speed never steps down, it's always between 4.2-4.4 Ghz running on all cores even when it's idling and the VID never drops below 1.142v, reaching 1.221v...

I'd like to let it run but after use I just turn it off. Would it be alright in the long term to just leave this system running? Using a Sabertooth 990 R.2 Motherboard

Will SteamOS be able to run A Realm Reborn? Would I see a performance increase with my AMD CPU/GPU

If this is true then my stock CPU/NB voltage of 1.14 is terribly low. Could anyone else confirm this? Thank you very much for this _zxzxzx_

http://www.youtube.com/watch?v=-hNgFNH7zhQ

Is there a chart anyone has access to to show me all the voltages 8350 runs on at stock settings? Notably; the CPU/NB, CPU, HT, and NB? I've read on a couple of posts on asus.rog and overclock.net that some people have to up the voltage on their CPU/NB on their boards to get stability and I've...

Sigh, sorry about that. https://www.dropbox.com/s/b1vkpo56xcjlyp1/Memory%201.png https://www.dropbox.com/s/93q6orlose98kcv/Memory%202.png

Is my RAM failing? Why are my values so low? I'm using 1600mhz @ 1.500v @ 9-9-9-24-41 so it's not overclocked. My motherboard is an Asus Sabertooth 990FX R.2 with a FX-8350. https://www.dropbox.com/s/33y3x1lulyynmxy/Screenshot%20%282%29.png...

Is there a system benchmark that can test all the components in my rig and grade them to other submissions of the same parts of different users? I'm trying to troubleshoot a hardware problem, I've seen PassMark but I don't know how accurate/reliable it is. Thank you.

Yeah I've seen that buy it's not confirmed.

Would offset rather than manual voltage work?

Is it LLC?

So to control this I had to set the voltage to 1.36 which is really 1.356 and climbs to 1.406. So I'm trying to tighten this margin.

FX-8350 /w Sabertooth 990FX R.2. I want to overclock to 4.4 and set the voltage to 1.37 but it will climb to 1.41 under load. I wouldn't care if it hit 1.39~1.406. What should I do?