Recent content by wesambukhari

I have a simple question, will the led's in my system(GPU, MOBO,Ram) die faster then the ones outside due to constant heat around them?

ok so weirdly setting llc to standard fixed the voltage spike so max voltage is 1.332 with 68*c under stress(not stability tested properly), but would 1.33v at 68* be good for 24/7?

Sorry i didnt mean gaming i meant handbreak where i sat at around 72-75 deg and as for the voltage i decided to go with 1.33v because vdroop drops the voltage to 1.2 under load and i dont like using the llc settings because they are ridiculously high. My llc options are standard, high and turbo

Hey guys, i recently got a 8700k and i tried overclocking at 4.8ghz but decided to use gigabytes dynamic voltage. i know this chip needs 1.330v to run at 4.8 stable. I set the freq at 4.8 on all cores, left all c states on, LLC Auto, AI AD/DC 1|1 and dynamic voltage at +0.1v. This was stable for...

I just got it back from rma too...

I tried to flash my bios but its frozen at the " automatically rebooting in 10 seconds" what do i do? I used the arous update tool.

I have a simple question, i am upgrading my parts and want to know if i have to upgrade my psu too. Its a 500w power supply and the upgrades are listed below. System: CPU- i7 8700k GPU- EVGA FTW3 GTX 1080ti Ram- 2 x 8 3200Mhz Motherboard- Z370 arous gaming 5 Storage: SSD, M.2, HDD Power supply-...

Hey guys i was wondering if power phases on a motherboard could potentially protect your cpu from a faulty power supply

When ever i go past +100 mhz my nvidia driver and game crashes

Soo i can crank it up to @+200 mhz as long as the temp stays in a stable state?

I overclock my 960 @+70 = 1500 mhz for 4 hours straight of intense gaming and the temp never went above 65C, should i crank it up a bit and would it be safe? (i play a lot of pubg and bf1)