Recent content by WumpusTheCoder

The AIO (LS720SE) is fitted with the default fans in the default exhaust config. The AIO is oriented with the tubes facing down, and then the radiator is at the top of the H9 Flow with the tubes coming from the right (standard configuration). So, the overall fan config is as follows: 3x side...

Hello there, As the title says - my (relatively) brand new 7800x3D currently never reaches no less than 49-50c when "idle". When under full 100% load with e.g. Prime95 or Cinebench - the temps easily reach upwards of 89c (and are never lower than 83c), which is then when my CPU starts to...

My AIO is in blow/exhaust configuration, at the top of my H9 Flow case. My side fans are intake, and my bottom fans are intake. My back fan is outtake. My AIO only had 2 cables coming off it - the 3 pin A-RGB connector, and a 4 pin (what looked to be a) PWM connector. I plugged this...

Hi there. I have recently when in windows been noticing spikes (when having NZXT cam open monitoring the CPU temperature) which go from around 45c to 71c for simple things like opening an application window, starting to type on discord etc etc. I wanted to test to see if my thermals were a tad...

Right, ok. One last question: With this fan header, can I utilize it as just a regular PWM system/chassis fan? View: https://imgur.com/a/uk4TB7O

I don't mind those 4 fans being non-RGB, to be honest. However, with the total cost of my build (2.4k GBP) I was just wondering if it would be silly to not go the extra mile and get those fans. However, I don't really mind like I've already said as I already have 3 Arctic ARGB PWM fans which...

I just bought a NZXT H9 Flow case for my new build, to pair with my other parts. With the fan situation, the pre-built ones are non-rgb regular DC black fans. Should I keep them, and connect them to a 3 way splitter? If so, will I still be able to control the speed of the fans with motherboard...

Image - View: https://imgur.com/a/m0m2eHC

Hi guys, does anyone have any advice on how to get out this MSI M.2 Frozr shield on my b650m mag mortar WiFi? It’s stripped and I can’t remove it with the rubber band trick or with a latex glove. I ideally also need to put the screw back in after I’ve done all this - but how am I going to do...

I am sure it’s those fans as it’s the only loud fans when I physically move my ear around and inside the computer. I also used an actual DB meter. Same results. The fans used are the ones that come with the DeepCool LS520SE WH (stock fans, basically). The pump is plugged into I think cpu fan...

Hi there. Is there any way to fix as the title says? They constantly ramp up and ramp down SUPER aggressively and not even when they should… For example - I open discord? 100% fan speed. I turn on my pc? It does the same thing for the duration of the posting sequence. Etc etc. Is there any...

I have updated the bios, and installed all drivers. How do I perform this check you speak of?

Completely clean windows install with the USB created with the Microsoft MCT.

Hi there. I just built my brand new computer, with the exact following specs: https://pcpartpicker.com/user/SyndicateBear/saved/#view=XLWdqs Here are the issues I’m facing: 1. Sometimes the computer doesn’t “post” for ages - as in it doesn’t get to the windows log in screen for ages and just...

Hi, I recently successfully case swapped my optiplex 3010 MT into an ATX case and everything went smoothly except from when I tried to make it post. Even though it would not post, everything was plugged in on the MOBO and sounded right. When trying to fix my problem I removed 1x 4g (I have 2x4g...