Recent content by xupaii

I have just got my first ever PC build to boot successfully, however the HDD and SSD are not being recognised. When I check BIOS, it says port 0 & 1 are empty, whereas in reality port 0 is my HDD and port 1 is my SSD. I cannot install Windows without the storage device/s, so it'd be appreciated...

The issue was, my PSU and cable for the PSU were being a bit tricky, but I solved it now.

Correction: I think the static-y noise is coming from the PSU cord EDIT: The PSU is fine when it isn't connected to the socket, but when I put the cable into the PSU it starts making the aforementioned "static-y" noise, I don't know what it is but perhaps this make my issue clearer?

After plugging the HDMI into the motherboard (which is how I assume I'd use the iGPU), I still get no response from the monitor, fans or computer in general.

No fans don't start spinning when I press the power button, and I have turned the plug on and off a few times now. As for the static-y noise, it's no longer happening when I put the HDMI port in the GPU. No LEDs light up anywhere, although if the cables for LEDs come from the PSU I haven't...

I've just built my first computer, and when I went to press the power button, nothing happened. The HDMI was plugged into the GPU but it was making a static-y noise, which I assume is bad. I reseated the GPU and had the same issue. I double-checked that the CPU is in correctly, which it was, and...