Recent content by ZeusFede

Well i am now at stables 4.7ghz with a voltage at 1.25 all time, the cpu never drop speed and voltage, so i am sure that i dont activate LCC .. This can Hurt the cpu or is fine? At idle the cpu is 35 celsius. I do a Prime95 with a guide, so i put it in Custom siz cores, min ftt and max ftt 1344...

Well. I format and all is good right now. But now i dont be sure how is the Best settings to ocing to 4.7ghz. I have to disable turbo and set manually the clock speed to 47, that is fine but the voltage i have to put in fixed mode at 1.3 volts for example and do a Prime 95 or Cinebench? And is...

Is better to download drivers for the asrock page or from Windows update?

No, before i have an i5 6500 and a b150 board. Now i install the z370 Taichi and the 8600k, and i install the last Bios but i DONT FORMAT... Maybe is that the problem? That Windows think or limit the speed of my 8600k because before i have the I5 6500? Windows recognize fine the 8600k

Maybe the problem is that before i have an i5 6500 at 3.6ghz, and i install the 8600k withouth format.. This can be a drivers conflict or that is a no sense? Windows update install all drivers

Here is a pic with Prime95 run , and the speed dont move across 3600mhz , but if u look in the HWINFO64 in turbo mode says 4600mhz , i dont know what i am doing wrong... I use a Pre Load OC profile of the ASrock Taichi to ocing to 4600mhz ( i set manually before with same results , never past...

I cant ocing ... I dont know what happens , i update the bios to the latest , but when i set voltage , core speed , etc , i save changes , enter windows and the 8600k is still in 3.6ghz , then i restart the PC , enter BIOS and all the options are undone ( but in CPU-Z says that the cpu is...

Thanks, i will read that guides. I am little worried because the Táichi have many options for the manual ocing but i will learn i think. My main concern is the voltage. The 8600k have 4.3ghz of turbo, and 3.6 base. If i up to 4.5ghz i have to only add 200mhz and that is 0.10 volt? Or i have to...

Hi, i upgrade today to a 8600k,Noctua D15s and Asrock Táichi but i am so noob and dont know how to ocing my cpu... Anyone can help me? I want to goal 4.5ghz for example, i have a Seasonic 520 and a GTX 1080 too. The asrock Táichi have many options and i dont know what to change. Thanks for the help

Uhm, i see in a page that is a Power Supply Calculator that my system in full loading on gaming draw about 439 watts, and recommend a 480w or more Power Supply... Is that real and i am fine with my Seasonic yet?

Hi all, i will buy a 8600k for ocing to 4.7, and have a gtx 1080, SSD, HHD, 2 fans of 140 and 1 fan 120mm with 16GB RAM DDR4.. Right now i have a Seasonic 520 but i think is a little low for the rig that say or will be good? If not, i see in Argentina a : XFX 750W XTR GOLD at130usd Evga 750w...

Okey, the Noctua thats is very good is the Dark rock pro 3 but dont fit, is bigger than Noctua D15s and the D15S is one of the bigger that can fit... I dont know if There is another Be quiet is smaller and good

Well that is a good notice... So you in my place, what do u think is better? The noctua d15s, another air cooling or AIO 280?

I dont have a z370, i have a mother B150m d3h and in a future buy a z270

Thats im afraid off... That noctua D15s dont fit in my case... So if i go for a 280mm can fit it in front for sure i think, or another air cooling like Deepcool Lucifer that is smaller but i dont think it that cooling good a oced 7700k