Recent content by zombiesoul

update1:So I tried repositioning the kit from A1,B1 to A2,B2 and it didnt boot it just kept beeping, when I put them back to th original position they felt off I am not 100 percent sure but I might of not had them properly installed. I will test them now with prime and the game that crashed most...

I passed memtest with one pass only with no errors with the 2933mhz and 2800mhz, I stopped it since it is a continuous test.

I have MCE disabled for the most part of the cpu overclock, and as for the cpu voltage I have it on auto with the level 4 Load line calibration which did very well when just overclocking the cpu. also when its needed the LLC shoots voltage up to 1.41 in prime95 test, which is scary so I wont go...

Bios is updated, and the xmp shows 1.35v for the 3000mhz but since the motherboard itself doesn't specify the 3000mhz I am aiming for 2933mhz. and I am not sure what relaxed timings are but I have tried auto timings along with manually typing in the xmp specified timings,also raising them...

Intel i9 9900k Asrock Z390 phantom gaming sli/ac Gskill trident z 3000mhz 16 gb dual Corsair RM 850x So heres my problem, XMP does not work or boot, I tried manual and auto timings @ 2933mhz because 3000 doesn't boot at all, along with raising the voltage to 1.4 from 1.35 because UEFIonly goes...

I did use the MSI afterburner but it seemed to fight against the amd wattman manual fan setup, but HWmonitor and Wattman gave me more than I need. Although I did keep Kombuster since you don't actually need the Afterburner to run the stress test. But I did have the GPU clocks at default along...

As far these settings, I know I don't need em that high I did this in order to stress test the Graphics Card in a way, to see how stable my undervolt or overclocking changes were. know what I mean, thanks though.

on high quality graphics Mboard = 40 celsius CPU = doesnt pass 51 Radeon VII= Averages 43 c and peak reaches 50 c VII junction temp=Averages 49 c peak @ 59 celsius ON Ultra quality graphics without 200 % image quality (rendering Scale) Mboard = 42 Celsius CPU = doesn't pass 51 Radeon VII =...

intel i9 9900k Gskill trident z 16gb Asrock z390 phantom gaming sli/ac Amd radeon VII 16 gb Corsair RM 850x psu

I was using Resident Evil 2 remake to check Gpu Undervolt, after a few tries I got it to stop shutting pc off but after a few minutes of playing game crashes I have mostly everything at Max graphics settings including 200 percent image quality. So my question: if I am undervolting or...

Last update from both AMD and Windows seemed to have fix this, but who knows how long it will last, because every update seems to be a roll of the dice.

I Have tried downloading drivers direct from Realtek, but it seems to have no page for it, That's were I used to go but it's gone, unless I'm looking in the wrong place. Anyway I'll take a look at that Asus, thanks for the reply As far as the Microsoft app for Realtek, it doesn't seem to work...

I have an asrock z97 with built in HD Realtek audio with windows 10 64 bit, and a 5.1 surround home theatre LG, at first it was fine but now every update to windows ten distorts and lowers my audio quality, I have tried everthing to fix from reinstalling drivers to changing cables. but now I am...

The power in Volts or Watts or any other form coming from all parts of an entire PC, which sections are the ones that should always be stable and which should be moving up and down? For instance I use HW Monitor to view the temperatures for CPU, GPU and Motherboard but I would like to know...