Recent content by Zophos

I've connected one to CPU_fan2 and the second one into CHA_fan2. Should i connect both to cpu_fan connectors?

Even with d14? Some people record temps under 60 with simmilar oc.

Hi guys, My 2500k is cooled with d14 and is currently at 4.2ghz with 1.2volts. Do you think that 63 degrees load is ok? My room temp is about 25.

Hi guys, Do you think that it matters where in the mobo i plug in my cooler's fans. My cooler is d14 currently one of the fans is in chasis fan 1 and the other in cpu fan 2 or something. Would it make a difference if i plug them into my fan controller?

And what about the llc level 1 or 5?

I tried setting them from the bios but nothing changed so i guess it doesn't work. Where can i get the software that controlls them?

Hi guys, I bought a noctua d14 and plugged both 3 pin fans into the mobo. One into a chasis 4 pin connector and 1 into a 3pin cpu connector. However, now i start to feel as if they aren't spinning on full speed. Is there a way to check that and should i connect both in cpu connectors or maybe...

I can turn on offset but i don't know how to set it up because it's confusing with these +0.05 and stuff

I overclocked my cpu using fixed voltage (1.2 volts 4.2ghz). The cpu is 2500k and i was wondering if i should enable things like speedstep to reduce my load temp and if yes which.

I oc'd it with a fixed voltage. Are there any settings in the bios that i should enable if i want lower temps? All things like speedstep are disabled at the moment.

Hi guys, I have a noctua d14 cooling my 2500k which is currently @4.2ghz with 1.2volts. Do you think that a temperature of 41 degrees idle is ok? My room temp is around 30 maybe a bit less.

Another thing is that i have a phobya touch 6 controlling them so I make sure they are running at 100%

2 bottom intake and 1 front intake. Pushing air outside I have 2 on the top plus one at the back.

I have a cm 690 with some noiseblockers pl2. I think the problem is either the ambient temp (which I dont know if it's high) or the case's mesh that might be blocking some air.

And do you think that 41 degrees idle is a lot for d14? My ambient is around 26. Load temps after 1hour are 62.