Recent content by zPoV

Sorry, I mean in the future. Only 1 version of the bios is out at the minute, so hopefully a future bios update

Perhaps. The model name is listed as compatible on the asrock website bar the drz bit so maybe a bios update will sort it.

I don't think that is true as I have seen many sites testing the 8400 with RAM speeds as high as 3200mhz

Hi, So I recently bought: asrock z370 Pro4, i5 8400, and 16gb adata Ax4u2800w4g17-drz I just can't get the RAM to run at 2800mhz, have tried xmp, manually putting timings in, and upping the voltage slightly. When I do these it won't post, however at default speeds (2666) it works fine. Any...

Thanks for your help! However I sorted it, I realised it renamed my hard drive to a different letter, hence it not finding my desktop. I renamed it back to the original letter and it worked!

Hi all, I have an ssd with windows on and then a normal secondary hard drive with all my files on it, including my desktop (used the libraries feature to have desktop folder on a different hard drive). I unplugged this secondary hard drive, booted (as i need the sata and power cable to look...

Sounds good, I read that the GPU asks for minimum 600w power supply so just thought I'd check

Hi, I am looking at overclocking my 3570k, and am wondering if my Antec Neo Eco 620c is enough? Full system: i5 3570k 16gb ddr3 1600mhz Gigabyte ga-z68p-ds3 Gigabyte Windforce 980 ti 240gb ssd 1tb hdd Antec Neo Eco 620c 620W Thanks!

Hi all, I'm looking at upgrading my current 1080p 60hz IPS monitor, and the only thing I know for sure is that I want to go to a high refresh rate i.e 144hz. I'm torn between going to 1440p, or staying at 1080p and getting G-Sync. I'm currently running a 980ti which i know can power 1440p, but...

Thank you! When I installed win 10 a few weeks ago after the anniversary update, i was experiencing the system freeze issues upon boot. Have these been fixed yet?

Hi, I have updated to windows 10 twice before on my current set up but have encountered problems so re-installed windows 7. I would like to do a fresh install (previous upgrades have been through update tool) and was wondering if my windows 7 key will work for a fresh install of windows 10...

if you can't use the disc just go to your motherboard's website and download the drivers from there. you should install all the drivers for your motherboard, i.e chipset, audio, ethernet. i wouldn't mess with updating bios unless absolutely nothing else works. chances are though if you haven't...

i had bad fps drops a while a go and found it was to do with my nvidia driver. one month it was fine then the next month it wasn't. try and remember when it was working fine and install an older nvidia driver from then and see if it works

have a look on your motherboard's website and make sure the ethernet drivers are installed. once these didn't work for me so i used the disc that came with the motherboard with the drivers on and installed the ethernet one and then it worked.