Beeping Codes

Forum discussion tagged with Beeping Codes.
  1. AdamG921

    Question PC Boot issues. Stuck in power on/off loop with beeps ?

    It started a couple days ago. My son was playing a steam game and he said the pc just suddenly shut off on him. We started it back up and started the game up for him again. This time after about 5-10 minutes, he calls me over and says he’s got a blue screen (blue screen of death). Unfortunately...
  2. tsagb

    Question PC Keeps Beeping

    Hey, so I've come across this strange occurrence where my pc beeps what appears to be randomly. It isn't a code or anything, usually its just a long continuous beep with random breaks. I recently upgraded my gpu to a gtx 1660 and I only have a 400w evga psu so I'm thinking it might be a wattage...
  3. S

    [SOLVED] Dell Inspiron 15R (5537) - Not turning on/beeping noises

    Today, I decided to turn on my old Dell laptop (Inspiron 15R 5537) to grab some data off it, but I was unable to get it to post. This laptop has been sitting without use for months now. After turning it on and off a few times, I could hear beeping noises from the computer. Beeps were 1..1..1..1...
  4. M

    Question PC wont power, MB beeping

    Hello all, So my PC won't power on. With the power switch flipped on from the PSU, the lights on the MB flash once then go out and a low continuous beeping can be heard from the MB. The low beeping stops once the PSU power switch is flipped off. I've already ruled out the PSU cable so far. It...
  5. Z

    Question My PC keeps beeping

    My PC sometimes Keeps continuously beeping for 1 min straight then it stops, what is the problem, I have 16gbs of ddr3 which are 2 kits of 2x4gbs mixed together, one is 1333mhz while the other one is 2133 mhz can that be the problem? I have them both set to 1333 in the Bios, and while the...
  6. M

    Momentary switch hookup

    I cannibalized a power button from one of my old computers and i plan on using it on a raspberry pi. In the process of removing the momentary switch the power and ground cables became disconnected from the switch. Is there any way to test the switch to figure out what goes where? Does it matter?