DDR 3

Hi guys, I would like to get some help. I have a gskill 2x8gb that works fine with xmp profile at 1866mhz. Now I got a 2x4gb kit Hyperx fury that works out of the box at 1866mhz but doesnt have xmp support. Now when i have all the 24gb instaled it gets 1333mhz because the hyperx deletes the xmp...

Hello Everyone, I had the opportunity to get some free RAM modules (Samsung DDR3-1600MHz 4GB modules), and I would like to ask if it is okay to do the following: I have an old(er) H97 chipset based system which previously had only 8GB RAM (a Kingston DDR3-1600MHz KIT) in dual channel. Now...

Hey, So currently I possess 24 GB of ddr3 memory. When I run pathfinder: wrath of the righteous game the used memory ramps up to 12 GB but I also get modified memory high usage around 10 GB. I know it is caused by this game because when I exit it, modified memory usage just disappears. I tried...

I recently bought some new DDR3 RAM (2x4GB) to add on to my old system. It has been using 2x4GB Patriot 1866Mhz RAM since I originally bought it some time ago, so I wanted to add two more RAM modules to have a 4x4GB. When I tried to add the new RAM I just got, the PC wouldn’t post. It posts with...

Hello! I am making this post to ask which memory setup is better: DDR3 Dual Channel 4x4 gb 1066 Mhz or Single Channel 2x8 gb 1600 Mhz. I can no longer use 4x4 GB in dual channel mode at 1600 Mhz because of damage to my motherboard. Context: A couple weeks ago I managed to bend some pins on my...

Hi everybody, I have two slots DDR3 1333 MHz. Could I add two more slots DDR3 1600 MHz? Thank you very much.

Hi there every one. I was trying to look for the schematics for DDR3 ram sticks to figure out what are the electronic components on the stick, but I couldn't find any. On a few DDR1 ram sticks that I have inspected there are a few components (that I think are only resistors and capacitors) and a...

Hello , I have used 8 bit DDR3 in one of my production and now am shifting to 16 bit DDR3. will it cause any thermal issues if we are switching from 8 bit to 16 bit DDR. Appreciate your quick response! Regards, Sachith

I have Q8400 and GT610 with 6gb ddr3 ram. So, What my problem is that sometimes it turns on and works peacefully but sometimes shuts down randomly and the hdd doesn't read and makes some noise. But when i turn off the pc and give a pat on the hdd it works fine. This started happening again...

I am in possession of a older build with components such as the FX 8150 Asus crosshair v formula board 8gb ddr3 memory Windows 7 Radeon HD 6670 graphics............. Let's upgrade this baby! Any recommendations? High to low prices I wanna hear them both. As far as my knowledge goes the...

So here is my setup: i5-4430 Haswell B87-G43 MSI gaming Mobo GTX 650Ti Boost 8GB Kingston Hyperx blu (2x4) CL9 I wanted to add another set of 2x4 sticks, bought the closest sticks on the market to those, both have the same speed but the new ones have a CL10 timing, all four...

Hello there, I'm running a Sony Vaio laptop with an existing integrated DDR3 RAM with one slot open which I am planning to fill. I tried using CPU-Z but it seems it cannot detect my integrated RAM to see its voltage, my question is, can I insert a a spare DDR3 RAM with 1.5V without frying it...

To make a long story short I managed to boot into bios using some old ram memory I had. Simple 1600 MHz ddr3. However I decided to go for another type of ddr3. Same frequency etc because I had more of them laying around. I realised something was wrong when I tried to OC the chip. Turns out my...

Hello guys, Recently I have started building a low budget PC for Vegas, Premiere, Photoshop, and League of Legends. I have started with an old office mini-tower pre-build by Lenovo M92p (Bought for around 150$). I have moved all of the parts to a new full tower case and added a lot of 120mm...

My friend is upgrading his memory from 8GB to 16GB but when he installed the memory in the same DIMM slot the old one was in, slot #1, the computer turns on but the monitor is displaying a black screen. Motherboard: https://us.msi.com/Motherboard/970-GAMING/Overview New RAM...

I have GA-G41MT-S2 (rev. 1.3) motherboard ,it have 2 ram slots of ddr3 I already had 2gb ram(1333mhz) and later I fixed another 2gb ram (133mhz) It was showing memory runs at dual channel interleaved at boot up My computer worked fine till 5th time I ran it at 6th time it started getting...

Hello all, I have a rig with the following specs / components AMD fx 8350 4 Mhz MSI Geforce GTX 1060 6GB 16 GB RAM DDR3 Cooler Master Hyper 212 EVO PSU Cooler Master Masterwatt Lite 600 ASUS Xonar DGX Sound card For reasons of a tight budget, I would like to make a CPU upgrade that would allow...

Could be a LGA 775 motherboard (for Intel core duo 2) that support DDR3 and not DDR2?

I Have The Following Hardware: Motherboard =MSI H97 Gaming 3 CPU =I7-4790(Non K) Ram =1 x 8GB Corsair 1600 Mhz DDR 3 PSU =Corsair CS750M If i take a GTX 1060 6GB Will It Bottleneck?

Hello, guys! I bought new ram for my system: Corsair Vengeance Pro DDR3 4x4gb 2400Mhz Cl11 Well after installing it i turned on XMP profile. So far so good. I started benchmarking my system than played some games but after 1 hour my system froze. Nothing moved on the screen and my pc didnt...