PowerPC

Page 2 - Forum discussion tagged with PowerPC.
  1. Z

    Computer Vision

    What is the difference between image and saturation?
  2. T

    Get a used 10D or buy a new Rebel XT?

    Archived from groups: rec.photo.digital (More info?) I'm not too concerned about the megapixel race, but I am ready to move beyond my 3 MP compact. My film gear has been Canon for many years, so I have many lenses and familiarity with how Canons operate (my compact is also a Canon). I know...
  3. O

    Problem overclocking Intel Pentium D 945 3.4GHz

    Hey everyone, Like the title says I have a problem while overclocking my Intel pentium D 945 3.4Ghz. What happens is when i get the CPU frequency above 220 and I restart my pc it has a problem restarting. The lights first go out, then they start up for a second and then they go out again, it's...
  4. Parge

    A quick question for you talent OC'ers

    Hi there guys! Just a quick question! I have a MSI GD65 and when I use the OC Genie feature, it enables it successfully, but the computer resets before getting to windows. Here are my specs I5-750 CPU 4GB DDR3 Gskill RAM 1 x Geforce 280GTX 3 x 7200rpm Hard drives 1 x Corsair H50...
  5. F

    Plz help..m confused

    hey guys i've a c2d e4400 @ 2.00ghz mobo asus p5gc/mx 1333 1gb ddr2 ram windows 7 ultimate 32-bit my cpu reaches OC limit at 2.66 ghz n after that it aint boots into windows..so i lowered it a bit and set it to 2.6ghz i ran prime95 test stress for 32mins..it gave no errors or warnings wot so...
  6. W

    I7 920 OC on a Foxconn Flaming Blade

    I've read around for a while now about over-clocking and had an attempt an hour ago. I'm not sure if it was the voltages that gummed it up or not, this is my first time ever over-clocking anything. The 2 reboots that followed only got to the OS boot before the rig made a whine and then...
  7. S

    How do I know if I killed my card?

    I know, sounds like a rediculous question... Let me explain what happened. I have an older homebuilt gaming rig that unfortunately uses AGP interface. My mobo is an MSI K8N neo2 Planinum (socket 939), 4200+ AMD 64 X2 processer, and x1950 Pro w/512 DDR3 AGP video card. Obviously this system...
  8. Aloid

    Will it fit under a Prolimatech?

    Hey guys just a quick question here, do you guys know if this memory will fit under a Prolimatech Megashadow on a asus p6x58d? Patriot Viper 1600mhz 6gb http://www.patriotmem.com/products/detailp.jsp?prodline=5&catid=23&prodgroupid=110&id=763&type=1 If not will this...
  9. S

    Cooling questions

    I have a Thermaltake M9 case, (2 120mm fans) and the system runs hot. I have a XFX HD Radeon 4770 that I would like to get more cooling for, as well as a Athlon X4. so my questions are. 1.what are good fan manufacturers 2. specs on fans. (size, etc) 3. Do I need a non stock cooler for my...
  10. D

    T state for a pentium 4 processor

    Can somebody provide me with the T state for a pentium 4 processor of 2.8 GHz.
  11. S

    Need Help Choosing a PSU

    This is what my main components will look like: Mobo - Asus Maximus Gene V (micro atx) GPU - EVGA GeForce GTX 660 SC Processor - i7 3770k (not sure on cooling unit yet any help on that would be much appreciated) As for PSU I'm thinking Apevia Iceberg atx 680W but not sure if this is a good fit...
  12. H

    My h60 95+ on all cores

    i just bought my pc yesterday i have not overclocked ever think is at stock and i have noticed that when my pc is at full load eg editing on after effects the temperature are very high especially has i have a h60 which is a pretty decent cooler my pc specs are i7 3770k gainward 670 gtx...
  13. S

    Overclock Q6700 on P5N32 SLI Deluxe

    Hey Guys I want to overclock my system for some extra power. My system: Board P5N32 SLI-Deluxe, CPU Q6700, RAM 4 x Apacer DDR2 1GB, PC-6400 Now what settings i do need to change to get an stabel low noise system that runs with the stock fan. Ist this even possible? I would be pleased if I...
  14. jay_l_a

    Odd E8400 speedstep problem

    My e8400 is o/c to 3.6GHz (400*9) now if I watch CPUz Whilst the CPU is idle I see the speedstep kick in and I see the reading drop to 2.4GHz (400*6) Before I overclocked, the CPU would happily sit at 2.0 GHz (333*6) whilst idle. But now when it drops to the 6* multiplier, it immediately ramps...
  15. S

    Memory probs after BIOS update

    Hi, Im having problems with my memory slots after a failed BIOS update. I initially tried to update my BIOS on a BIOSTAR TP45D2-A7 ver6 motherboard. When i rebooted it was giving me an overclock error and then when trying to boot windows was cblue screening. I went into the emergency BIOS...