Ptv Replaytv

I've been hearing a steady clicking/blinking noise and for a while I couldn't determine where it was coming from. Not only that but it seems to be causing me connection problems. I'm not overly tech savvy but I know I'm having connection issues as I keep losing the connection and when I do a...

Hey, was just wondering, will an sapphire HD 6870 fit into an antec 300 case? cheers :)

Hello, plz i have a desktop cpu unit with a lcd monitor but now i want to use cpu unit with crt monitor but the display is no longer appearing on the crt monitor

My HP envy 17 webcam is a "HP TrueVision HD Webcam"(hp.com) but I can't make the resolution 720p. in my webcam software says 640*480 or 320*240. What is going on here? is this really an hd webcam and the software is lieing to me or do i need to call HP?

Hey guys. I am looking to buy an Antec PSU for my computer, as the one I have currently does not have enough connectors for the additional case fans I wish to include. I am looking to buy the following PSU: http://www.ebuyer.com/114928-antec-basiq-power-350w-atx-12v-psu-0761345-06351-7 My...

After I dropped my i5-2500k into my gigabyte motherboard I tried to pull the arm down. But whenever I did there was a resistance and cracking noise. The cover was pushing down onto the sides of my processor. I still managed to push the arm in though and it has been working. Should I be worried...

hi,i am building gaming comp. with i5 2500 k witch s going to be overclocked about 4.2 ghz with gtx 590 on stock....ist this going to be good in .....Cougar Evolution schwarz, 700W....i love this case and power suply ist all redy in ! sorry my englisch ist bad:D

Hey guys! I am about to upgrade my motherboard with CPU AM3 AMD Athlon™ II X3 Triple-Core 455,3.30GHz/1.5MB BOX 45nm processor. Will GF8100 M2+ SE Ver. 6.x motherboard run this processor without any problems? Am3 into am2? Will it work? Thanks :)

Hey, I have recently been having like sever computer lag, Tixati "my torrent application" wont even load anymore. Could my PC be getting old and breaking or could my internet/router be terrible and causing my problems? Are there any decent freeware programs that would run diagnostics on my...

I almost posted a question in the graphics forum about my new A8-3850's 6550D, and realized that it's not really a graphics card... There has never been a need for a forum dedicated to integrated graphics before. Is there now? Thoughts?

Hi and thank you for reading my post. I have a hp dc7100sff that i have upgraded before and I am upgrading it again. The stats are as follows Video: ATI Radeon 4350, 512 mb vram Processor: P4 3.8 ghz ht (intel 670) Ram: 4gig High density Drives: 1 80 gig MDT MD800jD-00MSA1, 1 40 gig WDC...

Hello, AMD and Atom CPU benchmarks just for Netbooks your, MG

I have a core i7 2600. When I run CPU Z it claims my core clock to be at ~1596 mhz. Is this normal?

Hello everyone. I bought a new computer around Christmas time and I had never even though to look at my CPU temperatures because I have watercooling. I recently realized that my GPU temperatures were going really high (but acceptable) and my CPU was going past the danger zone. I don't know how...

Today I saw a man with something the size of a deck of cards plugged into his usb port. This device had it's own display screen with catagories to choose from. Do you have any idea what this is?

Hello, How do I take a computer out of sleep mode if the screen is black?

http://www.microcenter.com/single_product_results.phtml?product_id=0341643 My budget isn't too high and I need at least 650 watts.

Hi everyone, first of all sorry about my english. recently I bought 8GB (4*2GB) of DDR3 Corsair 1600 at 9-9-9-24. all the same. When i tryed first the computer doesnt started, I thinked that could be the memory voltage but it didn't started even whit the voltage stucked in 1.66. I finally can...

I am building a new crossfire tri-monitor rig, and pushing it with dual 6950s. In my old rig, I have a 4 year old corsair h1000x PSU, in a Enormous!!! CM Cosmos case. I'm a little weary of using the 1000, not sure how it'll hold up after 4 years? And the case I have now is way too big, and...

My specs are as follows: Zebronics PSU 500w Platinum series Gigabyte MA785GM-US2H mobo AMD Phenom II X4 965 BE Kingston 4 gb, DDR2 800 XFX ATI Radeon Hd 4770 WD 500gb HDD 7200 Well my problem has started only a few days ago with an annoying screeching sound that occurs very...

i have a vaio e33wfx pc and with an amd athlon II x2 processor and i was wondering what socket type it is so i can upgrade the processor

Hi guys, I recently built myself a new computer around a amd x3 435 processor and a asus m4A78LT-M motherboard. At first I was hesitant to use the asus core unlocking as this is the fastest computer I've ever had and it was fast enough for me, I also read that there was a very small chance you...

So I was cleaning out my computer with some compressed air(I read this is not a good thing) when I accidentally held the can in an upright position and sprayed it into the heat sink. Now my computer will not post at all. Although this problem has been happening for a while now, my computer was...

Hello everybody! I just signed up but i have been looking at Toms Hardwares benchmarks for a couple of years now but never realised that there was an amazing forum :) I am just about to upgrade my system from an old E5300@3.93GHz as it was just not living up to what I needed it to do. Anyway I...

Hello, Does anybody know a motherboard with a GeForce mGPU and 2 PCIe x16 with a LGA775 Socket?

Can anyone recommend a mid-ATX or full tower like the Thermal-take Level 10 GT? I'm looking for a case that differs from a standard (boring) rectangle. I use the Level 10 GT as an example because it stands out from the typical tower you'd find from HP, Acer, etc. I'm not looking for unique so...

would any1 recommend a good cpu fan with heatfan for the below computer? Packard Bell iStart 2369 Pent 4 3.06GHZ CPU 1GB Ram it has a 230v PSU

Hello everyone :) I have been having issues ever since I purchased these two of the highest ratest products. lets start with 1 of them at the time. 1. I have purchase the Saitek Cyborg R.A.T 7 mouse. I was very happy with it at first. I love how customizable it is. I really enjoy assembling it...

Hi! I have almost builded my pc ,but i don't know if to choose 650 or 750w SPECS: INTEL I5 2500K 3.3GHZ EVGA GTX 570 GDDR5 CM STORM ENFORCER G.SKILL SNIPER 8GB 1866MHZ Could someone of you guys suggest to me something good ??

So my i5 2500 CPU has seemed to be running too hot. When it's idle it will sometimes run around the 60s, but when I run a game it spikes from 42 to 70 in seconds. The thing that worries me the most is this just started happening not two days ago. If this is normal could you please let me know...

I am having some problems with a new build I made, it is doing the boot loop problem the mother I have is a Gigabyte z68a-d3h-b3 and cpu is I7 2600 I have narrowed it down to either the MB or CPU how can I tell if the CPU is either no good or burned out.. I took out CPU and the back of it shows...

I must say, ive been impressed with Nvidia as of late. Going from the Fermi failiure that was 6 months late last year to having the superior GPU lineup this year. Furthermore, Tegra 2 is winning over companies like Samsung, and LG, especially for tablets. Whats even more exciting is their...

Hi all, I bought the HAF X case and it came bundled with the CM GX 750W psu. My system specs: I5 2500K @ 4.6ghz asus p8p67-m pro corsair vengance 8gb ddr3 1600 2 x 4gb 2 x amd 6950 xfire flashed to 6970 bios antec kuhler 620 CM GX 750W psu 1 ssd 1 sata hd 1 disk drive 5 fans I was wondering...

I just got a NZXT Sentry 2 Fan controller from Fry's. Problem is, when i plug the power molex into my PSU molex, and boot the computer, the fan controller just sits there, it doesn't light up or turn on or anything. Any help would be much appreciated.

Hello TomsHardWareCommunity! I pose a challenge to anyone good with choosing mice! I had used my Dell mouse for many years and it was getting old so I bought myself a Logitech G9x - I HATE this mouse with passion. It is so fat and short and it doesn't fit my hand at all! I am strictly an FPS...

I've been spending quite a bit of time selecting a PSU, of course like many I want to get as much bang for my buck and I had been looking at monster 1000w -1200w units. I had to stop and think what my power consumption needs really were. My plans are to get a GTX 560ti and...

im looking at cases and i come across the Thermaltake Element G. it seems to be a good case with what it offers, my only dissatisfaction with it is the lack of a side window but i could live without it. is this a good case? anyways it comes with the Thermaltake TR2 RX 850. at least thats what...

Hi, Not long ago I decided to replace the thermal paste on my I7 920 heatsink, with the artic silver paste in hope of reducing the temps. Sadly the cpu became hotter (idle: 50-55, when playing demanding games it can reach 70 degrees, but it usually stays in the mid 60's), so I made sure that...

Just wondering if this is a good buy? as im building a computer for the first time, cheers :) http://www.ebuyer.com/220862-coolermaster-cm690-ii-lite-with-coolermaster-gx-650w-psu-special-offer-bundle-rc-692-kka3

i've tried the latest version just out. no good same type of problems. i'm at a loss