Archived from groups: microsoft.public.windowsxp.hardware (More info?)
Greetings,
I'm having problems printing to a printer that's connected to my home
network. I have everything set up in a "WORKGROUP." All the drivers for
the printer in question are installed on each client in the...
Archived from groups: microsoft.public.windowsxp.hardware (More info?)
I'M TRYING TO INSTALL WINDOWS XP FROM THE FLOPPY DISK AND
IT GETS TO DISK #6 ANT THE SETUP TELLS ME IT CAN'T FIND A
CD-ROM DRIVE I INSTALLED A CD-ROM DRIVER CONFIG IT IN
CONFIG SAYS AND AUTOEXEC.BAT AND IT STILL CAN'T...
Archived from groups: microsoft.public.windowsxp.print_fax (More info?)
I just bought a Lexmark printer X1150 (3 in 1). When
trying to install the software only the scanner installs,
not the printer.
I get the following message;
There was a problem installing this hardware Lexmark
x1100...
Archived from groups: microsoft.public.windowsxp.hardware (More info?)
My Cd rom drive is not working properly. It has power, but when I put in the cd, it reads it and then nothing happens. I tried uninstalling the drivers for it and reinstalling them but they still dont' work. When I check...
Archived from groups: microsoft.public.windowsxp.hardware (More info?)
Greetings
I have a maxtor 230 gig IDE ATA 133 DMA 6 drive connected
to a Promise ATA 133/SATA controller on a Soyo Dragon
P4X400 mobo. The Promise card and maxtor drive were
bundled together. When I installed it, I used...
Archived from groups: microsoft.public.windowsxp.configuration_manage (More info?)
When I open my I.E. a program redirects me to their site.
(all about searching.com) When I opened Netscape it told
me that there was an error reading start up configuration
files.
pref.js, line 94: Syntax...
Archived from groups: microsoft.public.windowsxp.hardware (More info?)
When I try to copy a file, whether a data or video file to my Pioneer DVD-RW
DVR-105, I get the message Resource in Use. It plays OK whether DVD, CD,
photo or retrieving data files.
Any suggestions what might be going on...
Guest
Thread
Internet Explorer
Microsoft
QuickLaunch
Windows XP
Archived from groups: microsoft.public.windowsxp.hardware (More info?)
Decided to treat myself to a top range system. But only one small and
annoying snag :(
It will run a 3D screensaver for about 1-4 minutes before freezing
solid! It does not freeze in normal operation.
The system is:-
MSI...
I just formatted away my old XP installation and made a new XP install and it is blindingly fast!! Why? It is always like this, works really fast at first but with time it gets slower and slower and I defrag the disk regularly. Is it all the extra crap I install (antivirus programs and the like...
Yes I know that I can use windows update BUT with my nforce2 mobo I have to install service pack one before I can install the unified drivers which includes my ethernet drivers or my usb2.0 will not be functional which sucks ass if you ask me...how do they expect you to download service pack one...
XP was installed and working when we opened the case to redo the thermal grease for better cooling. Everything went back in and XP won't run. Here's the skinny...
1. System boots OK. I can press [Del] to get into the BIOS setup OK to change, save, etc.
2. After the normal BIOS messages, a...
Our IT guy a work says that the new XP is loaded with spyware ??? is that true or is he full of himself?? those guys are usually in the know right? he didn't give his source but said it tracked every movement the computer made while online and reported to somewhere?? could this be true?? has any...
Archived from groups: microsoft.public.win2000.file_system (More info?)
Made the iSCSI connection, created a basic volume in Disk Manager, rebooted,
volume remounted as expected. Created a share on the volume, rebooted, share
disappears!!!
--
Mike Matheny
Guest
Thread
Browsers
Internet Explorer
Microsoft
QuickLaunch
Taskbar
Windows XP
Archived from groups: microsoft.public.win2000.security (More info?)
Is it possible to use RPC over HTTPS on a Windows 2000
client? Do I need to install a patch or update to make
this possible?
Thank you,
Pascal
Archived from groups: microsoft.public.win2000.security (More info?)
Hi,
I get these error messages on a windows 2003 server domain controller
every 8 hour, Is it something I should be worry about I didn't find any
clue anywhere
---------------------------------------------------------
Event...
Archived from groups: microsoft.public.win2000.group_policy (More info?)
I have a window 2000 dc w/ SP4 installed.
When i go to Active Directory Users and Computers snap-in, and try to edit
the Default Domain Contrllers Policy or Edit Default Domain Policy From the
Domain controller...
Archived from groups: microsoft.public.win2000.security (More info?)
Hi, All
I have successfully established a two-way external trust (2) separate
forest. (Win2003 Forest and Win2000 forest).
In addition I have added my domain admin account from the Win2003 Forest to
the local builtin...
Archived from groups: microsoft.public.win2000.dns (More info?)
My question: How can I configure the clients in the parent domain to
resolve queries in the subdomain without having to search on the FQDN?
I have created an AD subdomain, configured the DNS servers in the
subdomain, delegated the...
Archived from groups: microsoft.public.win2000.general (More info?)
HAve 2 drives and now the slave has disappeared from the control panel or
windows explorer. It appaears in the device manager, It is a Western
digitial Drive and ran there test utility from floppy and it says it is fine...
Archived from groups: microsoft.public.win2000.security (More info?)
I have been having some trouble with two programs running. I delete them and
use hijackthis and make sure they are gone from startup. I then go into the
registry and delete them, after which I reboot and delete the executables...
Archived from groups: microsoft.public.win2000.general (More info?)
When trying to map a network drive, I could not map \\Server\Test, but I
could map \\IPaddress\test. Anyone suggest why that would occur?
Archived from groups: microsoft.public.win2000.general (More info?)
I have a machine that I upgraded from Win98 se to Win2K sp4 from a disk.
Everything worked fine except the virtual machine. Of course, Microsoft no
longer supports this after getting their chin bloodied by Sun, but I'm trying...
Archived from groups: microsoft.public.windowsnt.terminalserver.client (More info?)
Hi everyone,
I'm currently have a few issues with one my clients (40 users) and their
terminal server. Everything runs fine, except for 1 application. They're
running Sol6 (an accounting package I believe)...
Archived from groups: microsoft.public.win2000.group_policy (More info?)
I would like to restrict any subfolders under My Documents from being
redirected. We currently have this feature turned on, and the users'
My Documents folders(and all their subfolders line My Music, My
Pictures, etc) are...
Archived from groups: microsoft.public.win2000.dns (More info?)
All,
I have both the W2K Server and W2k Pro Resource Kits. Microsoft's site
indicates that the following files should be in the RK:
DNSRECORD.PL
DNSSERVER.PL
DNSZONES.PL
NETDNSCONFIG.PL
However, I can't file any of them.
Here...
Archived from groups: microsoft.public.win2000.setup,microsoft.public.windows.server.general,microsoft.public.windows.server.setup (More info?)
Hello
In our organization we installed RRAS VPN server (on Windows 2003).
We want to use L2TP/IPsec, so I enabled option 'allow custom IPsec policy...
Archived from groups: microsoft.public.win2000.general (More info?)
We are using a networked Windows 2000 server with current updates. Within the
last 5 calendar days the network icons (monitors in the system tray) are
showing continuous usage, yet this server is very isolated and there are...
Archived from groups: microsoft.public.win2000.general (More info?)
I am assisting a customer running Windows 2000 on a Dell Optiplex GX280. He
is using the shift key to type numerous capital letters in a row. After
typing 6 or 8 caps, if he pauses in the text string, the system starts typing...
Archived from groups: microsoft.public.win2000.setup (More info?)
I have a Windows 2000 server and noticed in the license manager the following
exclamation point in yellow next to the Windows Server product:
Per seat purchased: 25
Per seat allocated: 32
Per server purchased: 5
Per server...
Archived from groups: microsoft.public.win2000.group_policy (More info?)
We have a strange problem, which we can't solve. We have tried to
look different documents and newsgroups but we haven't find anything
useful. Any ideas would be greatly appreciated.
PROBLEM
We have about 50 computers...
Archived from groups: microsoft.public.win2000.active_directory (More info?)
Using Windows 2000 Server and Windows 2000 Professional client.
We have a network where the servers are part of a domain but the clients PCs
are not. The users use applications through a Citrix server.
I had a need...
Archived from groups: microsoft.public.windowsnt.terminalserver.applications (More info?)
I have tried deleting the users profile folder in their personal directory -
this recreates when they log back on and usually clears problems like this
but that has not worked.
Anyone have any other...
Archived from groups: microsoft.public.windowsnt.terminalserver.client (More info?)
How can I prevent all copy/cut and past activity for all/individual clients
from their TS session to their local PC
Many thanks
Archived from groups: microsoft.public.windowsxp.print_fax (More info?)
After installing XP SP2 & updates, I can print documents such as MSOffice but
I can't print a webpage which I could before. Any ideas or solutions?
Guest
Thread
Configuration
Customization
Microsoft
QuickLaunch
Windows XP
Archived from groups: microsoft.public.windowsnt.domain (More info?)
How to Create A BDC in a Windows 2000 Domain network? If U have any
idea pls help me.
--
http://www.WindowsForumz.com/ This article was posted by author's request
Articles individually checked for conformance to usenet...
Archived from groups: microsoft.public.win2000.group_policy (More info?)
Does anyone have a solution to this problem?
USERENV(1f0.b4) 16:21:03:297 ProcessGPO: Couldn't find the group policy
template file
<\\SERVER.Local\SysVol\SERVER.Local\Policies\{9949DC9A-F2E0-4281-B200-D3D372...
Archived from groups: microsoft.public.win2000.advanced_server (More info?)
Dear All,
I did not find my Run command menu in my Windows 2000 AS SP4, where did it
go? .. where / what should I check ? .. please advise
Regards
Winanjaya