Essentially I am considering upgrading from RTX 3090 to RTX 4090; however I have only two 8-pin PCIe cables plugged into my PSU (Corsair HX1200 80 PLUS PLATINUM).
I assumed since each cable can handle 288W, for a total of 576W, I could just use them without needing to install new power cables...
Hello, I had this build recently all new parts, every read was normal, the 5.0v 3.3v 12v all were normal
but recently I've noticed that the cpu BCLK is getting lower than 100mhz, BCLK reading in bios when I built this pc it was going around 100~100.6mhz and never dropped below 100 like my...
Hello
So, i dont understand power supply rails.
Im looking to buy a 1000w psu (overkill but i want it), it can deliver almost 1000w on the +12v rails, but only 125w on the +3.3 and +5v rails combined.
Are those 125Watts enough for 5 HDD and 2 D5 pumps? Along with keyboards and other usb...
In the RMx series reviews the OCP (+12V) has a "✗". But in Corsair's manual says: The RMx Series features OCP on the 3.3V, 5V and 12V rails. And even in the VS series reviews it has a "✓" so I'm confused.
I'm really in a tight budget and I'm planning to revamp my setup.. I'll be getting a Palit GTX 950 (from 750ti) and 8 GB Hyperfury 1866 (From 4 Gb 1333).. My problems comes with the processor I already have a 960t I can sell it for $50 (I'm from the Philippines) and buy a FX-6300 which is at...
I am getting some new pc parts and my old rig has 6gb of ram and im ordering 8gb of ram so can i use them and have 14gb of ram in my new rig. My motherboard does have 4 slots for ram.